On 02/08/2016 09:27 PM, Saksham Jain wrote: > Following changes have been made to enable secure boot: > 1) Sec_init has been called in starting to initialize SEC Block (CAAM) > which will be used for Secure Boot validation later for both ls2080a qds > and rdb > 2) 64Bit address in ESBC Header has been enabled as this SoC is based on > armv8 > 3) Secure Boot defconfigs created for boards (NOR Boot). > > Signed-off-by: Aneesh Bansal <aneesh.ban...@nxp.com> > Signed-off-by: Saksham Jain <saksham.j...@nxp.com> > --- > Changes for v2: > - No changes > Changes for v3: > - No changes > Changes for v4: > - Cleaned up commit message > > arch/arm/include/asm/fsl_secure_boot.h | 9 +++++++-- > board/freescale/ls2080aqds/ls2080aqds.c | 5 ++++- > board/freescale/ls2080ardb/ls2080ardb.c | 5 ++++- > configs/ls2080aqds_SECURE_BOOT_defconfig | 15 +++++++++++++++ > configs/ls2080ardb_SECURE_BOOT_defconfig | 15 +++++++++++++++ > configs/ls2085aqds_SECURE_BOOT_defconfig | 15 +++++++++++++++ > configs/ls2085ardb_SECURE_BOOT_defconfig | 15 +++++++++++++++ > include/configs/ls2080aqds.h | 2 ++ > include/configs/ls2080ardb.h | 2 ++ > 9 files changed, 79 insertions(+), 4 deletions(-) > create mode 100644 configs/ls2080aqds_SECURE_BOOT_defconfig > create mode 100644 configs/ls2080ardb_SECURE_BOOT_defconfig > create mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig > create mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig >
Please update MAINTAINERS file. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
