[U-Boot] [PATCH 3/3] imx: print ARM clock for clocks command

[Peng Fan]

Default print ARM clock for clocks command.
Test on i.MX6UL 14x14 evk board:
"
=> clocks
PLL_SYS         792 MHz
PLL_BUS         528 MHz
PLL_OTG         480 MHz
PLL_NET          50 MHz

ARM          396000 kHz
"

Signed-off-by: Peng Fan <van.free...@gmail.com>
Cc: Stefano Babic <sba...@denx.de>
---
 arch/arm/cpu/armv7/mx6/clock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 88380a6..3b53842 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -1183,6 +1183,7 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int 
argc, char * const argv[])
        printf("PLL_NET    %8d MHz\n", freq / 1000000);
 
        printf("\n");
+       printf("ARM        %8d kHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000);
        printf("IPG        %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
        printf("UART       %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
 #ifdef CONFIG_MXC_SPI
-- 
2.6.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot