Hi Stefano,
On 01/29/2016 11:07 PM, Peng Fan wrote:
Hi Akshay,
On Fri, Jan 29, 2016 at 03:16:40PM -0500, Akshay Bhat wrote:
Add support for GE B450v3, B650v3 and B850v3 boards. The boards
are based on Advantech BA16 module which has a i.MX6D processor.
The boards support:
- FEC Ethernet
- USB Ports
- SDHC and MMC boot
- SPI NOR
- LVDS and HDMI display
Basic information about the module:
- Module manufacturer: Advantech
- CPU: Freescale ARM Cortex-A9 i.MX6D
- SPECS:
Up to 2GB Onboard DDR3 Memory;
Up to 16GB Onboard eMMC NAND Flash
Supports OpenGL ES 2.0 and OpenVG 1.1
HDMI, 24-bit LVDS
1x UART, 2x I2C, 8x GPIO,
4x Host USB 2.0 port, 1x USB OTG port,
1x micro SD (SDHC),1x SDIO, 1x SATA II,
1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2
Signed-off-by: Akshay Bhat <akshay.b...@timesys.com>
Reviewed-by: Peng Fan <peng....@nxp.com>
Regards,
Peng.
If there are no further review comments, can this patch be applied in
the next merge window (for v2016.05)?
Also I have couple updates to the bx50v3.c file. Should I wait for this
patch to be applied before sending a new patch with the changes (wasn't
sure if you had a -next branch where the v2 patch was already applied)?
Thanks,
Akshay
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot