Hi David, On 20 February 2016 at 00:04, David Müller (ELSOFT AG) <d.muel...@elsoft.ch> wrote: > Hello > > I'm currently implementing DM support in the s3c24xx serial driver and > activating DM support for the VCMA9 board using > > CONFIG_DM=y > CONFIG_DM_SERIAL=y > CONFIG_OF_CONTROL=y > CONFIG_OF_EMBED=y > CONFIG_DEFAULT_DEVICE_TREE="s3c24xx-vcma9" > > > This results in the following problem: > > CC drivers/i2c/s3c24x0_i2c.o > drivers/i2c/s3c24x0_i2c.c: In function 'process_nodes': > drivers/i2c/s3c24x0_i2c.c:1024:12: error: 'PINMUX_FLAG_HS_MODE' > undeclared (first use in this function) > drivers/i2c/s3c24x0_i2c.c:1024:12: note: each undeclared identifier is > reported only once for each function it appears in > drivers/i2c/s3c24x0_i2c.c:1035:3: warning: implicit declaration of > function 'pinmux_decode_periph_id' [-Wimplicit-function-declaration] > drivers/i2c/s3c24x0_i2c.c:1041:3: warning: implicit declaration of > function 'exynos_pinmux_config' [-Wimplicit-function-declaration] > make[1]: *** [drivers/i2c/s3c24x0_i2c.o] Error 1 > > > Do you have an updated version of the s3c24xx I2C driver available yet?
This seems to be because: #if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) #include <asm/arch/clk.h> #include <asm/arch/cpu.h> #include <asm/arch/pinmux.h> #else #include <asm/arch/s3c24x0_cpu.h> #endif so perhaps you need to check if the pinmux needs to be defined for your chip? Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
