>>>>> "Hans" == Hans de Goede <hdego...@redhat.com> writes:
> From: Jelle van der Waa <je...@vdwaa.nl> > SY8106A is a PMIC which is used on the Allwinner > H3 Orange Pi Pc board. The VOUT1_SEL register is > implemented to set thea default V-CPU voltage to 1200 mV. > Signed-off-by: Jelle van der Waa <je...@vdwaa.nl> > [hdego...@redhat.com: Polish Kconfig parts a bit] > Signed-off-by: Hans de Goede <hdego...@redhat.com> > --- > board/sunxi/Kconfig | 6 +++++- > board/sunxi/board.c | 5 +++++ > configs/orangepi_pc_defconfig | 1 - > drivers/power/Kconfig | 18 +++++++++++++++++- > drivers/power/Makefile | 1 + > drivers/power/sy8106a.c | 23 +++++++++++++++++++++++ > include/configs/sunxi-common.h | 6 ++++-- > include/sy8106a.h | 5 +++++ > 8 files changed, 60 insertions(+), 5 deletions(-) > create mode 100644 drivers/power/sy8106a.c > create mode 100644 include/sy8106a.h > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig > index a334aa3..449d9dd 100644 > --- a/board/sunxi/Kconfig > +++ b/board/sunxi/Kconfig > @@ -372,11 +372,15 @@ config I2C3_ENABLE > See I2C0_ENABLE help text. > endif > +if SUNXI_GEN_SUN6I > config R_I2C_ENABLE > bool "Enable the PRCM I2C/TWI controller" > - default n > + # This is used for the pmic on H3 > + default y if MACH_SUN8I_H3 > + default n if !MACH_SUN8I_H3 Default is 'n', so the last line can be removed. -- Bye, Peter Korsgaard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
