Hi Tom, there is another issue in this PR. Please drop it, I'll send another one shortly.
Andreas On 18.02.2016 22:34, Andreas Bießmann wrote: > Hi Tom, > > Please pull into u-boot/master. > > buildman for arm has a warning in one patch which is repaired some patches > later in this pull. I think this is Ok since it is an unused variable warning > for some boards which do not declare a specific define. The later patch will > remove the warning line completely. > > Andreas > > The following changes since commit 727a25b2418031e1b94ba603e0eb61657024091b: > > Prepare v2016.03-rc2 (2016-02-15 21:44:30 +0000) > > are available in the git repository at: > > git://git.denx.de/u-boot-atmel.git master > > for you to fetch changes up to bb21ae82b27aa51254f32f0238d3bf60874646dd: > > ARM: Add Support for the VInCo platform (2016-02-18 21:46:20 +0100) > > ---------------------------------------------------------------- > Gregory CLEMENT (1): > ARM: Add Support for the VInCo platform > > Marek Vasut (1): > arm: at91: Add support for DENX MA5D4 SoM and EVK > > Matthias Michel (1): > siemens,at91: enable features for smartweb > > Samuel Mescoff (1): > ARM: at91: sama5d2: configure the L2 cache memory > > Wenyou Yang (15): > ARM: at91: asm/at91_pmc.h: fix trival register offset > ARM: at91: clock: add a new file to handle clock > ARM: cpu: at91: clean up peripheral clock code > board: atmel: clean up peripheral clock code > drivers: at91: clean up peripheral clock code > ARM: at91: clock: add UTMI PLL enable/disable function > ARM: at91: armv7: clean up UTMI PLL handle code > drivers: usb: atmel: clean up the UTMI PLL code > board: atmel: siemens: clean up UTMI PLL code > ARM: at91: clock: add PLLB enable/disable functions > drivers: usb: ohci-at91: clean up the PLLB code > board: atmel: siemens: clean up PLLB code > ARM: at91: clock: add PMC_PLLICPR init function > ARM: at91: clean up the PMC_PLLICPR init code > board: atmel: clean up the PMC_PLLICPR init code > > arch/arm/mach-at91/Kconfig | 12 + > arch/arm/mach-at91/Makefile | 1 + > arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 14 +- > arch/arm/mach-at91/arm920t/clock.c | 38 ++ > arch/arm/mach-at91/arm920t/timer.c | 6 +- > arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c | 36 +- > arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c | 28 +- > arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c | 37 +- > .../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 33 +- > arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 40 +- > arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c | 28 +- > arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 38 +- > arch/arm/mach-at91/arm926ejs/clock.c | 37 +- > arch/arm/mach-at91/arm926ejs/cpu.c | 1 - > arch/arm/mach-at91/arm926ejs/timer.c | 5 +- > arch/arm/mach-at91/armv7/clock.c | 26 -- > arch/arm/mach-at91/armv7/cpu.c | 1 - > arch/arm/mach-at91/armv7/sama5d2_devices.c | 5 +- > arch/arm/mach-at91/armv7/sama5d3_devices.c | 5 +- > arch/arm/mach-at91/armv7/sama5d4_devices.c | 5 +- > arch/arm/mach-at91/armv7/timer.c | 1 - > arch/arm/mach-at91/atmel_sfr.c | 7 + > arch/arm/mach-at91/clock.c | 121 ++++++ > arch/arm/mach-at91/include/mach/at91_common.h | 1 + > arch/arm/mach-at91/include/mach/at91_pmc.h | 15 +- > arch/arm/mach-at91/include/mach/clk.h | 8 + > arch/arm/mach-at91/include/mach/sama5_sfr.h | 1 + > arch/arm/mach-at91/phy.c | 1 - > arch/arm/mach-at91/sdram.c | 1 - > arch/arm/mach-at91/spl_at91.c | 5 +- > arch/arm/mach-at91/spl_atmel.c | 4 + > board/atmel/at91rm9200ek/at91rm9200ek.c | 1 - > board/atmel/at91rm9200ek/led.c | 6 +- > board/atmel/at91sam9260ek/at91sam9260ek.c | 15 +- > board/atmel/at91sam9261ek/at91sam9261ek.c | 8 +- > board/atmel/at91sam9261ek/led.c | 6 +- > board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +- > board/atmel/at91sam9263ek/led.c | 9 +- > board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 20 +- > board/atmel/at91sam9m10g45ek/led.c | 7 +- > board/atmel/at91sam9n12ek/at91sam9n12ek.c | 6 +- > board/atmel/at91sam9rlek/at91sam9rlek.c | 18 +- > board/atmel/at91sam9rlek/led.c | 7 +- > board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 +- > board/atmel/sama5d2_xplained/sama5d2_xplained.c | 1 - > board/atmel/sama5d3_xplained/sama5d3_xplained.c | 9 +- > board/atmel/sama5d3xek/sama5d3xek.c | 9 +- > board/atmel/sama5d4_xplained/sama5d4_xplained.c | 9 +- > board/atmel/sama5d4ek/sama5d4ek.c | 9 +- > board/bluewater/snapper9260/snapper9260.c | 15 +- > board/calao/usb_a9263/usb_a9263.c | 11 +- > board/denx/ma5d4evk/Kconfig | 12 + > board/denx/ma5d4evk/MAINTAINERS | 6 + > board/denx/ma5d4evk/Makefile | 7 + > board/denx/ma5d4evk/ma5d4evk.c | 412 > +++++++++++++++++++++ > board/egnite/ethernut5/ethernut5.c | 20 +- > board/esd/meesc/meesc.c | 15 +- > board/l+g/vinco/Kconfig | 12 + > board/l+g/vinco/Makefile | 1 + > board/l+g/vinco/vinco.c | 212 +++++++++++ > board/mini-box/picosam9g45/led.c | 7 +- > board/mini-box/picosam9g45/picosam9g45.c | 17 +- > board/ronetix/pm9261/led.c | 7 +- > board/ronetix/pm9261/pm9261.c | 22 +- > board/ronetix/pm9263/led.c | 7 +- > board/ronetix/pm9263/pm9263.c | 19 +- > board/ronetix/pm9g45/pm9g45.c | 20 +- > board/siemens/corvus/board.c | 10 +- > board/siemens/smartweb/smartweb.c | 9 +- > board/siemens/taurus/taurus.c | 9 +- > configs/ma5d4evk_defconfig | 11 + > configs/smartweb_defconfig | 5 +- > configs/vinco_defconfig | 13 + > drivers/net/at91_emac.c | 10 +- > drivers/usb/host/ehci-atmel.c | 46 +-- > drivers/usb/host/ohci-at91.c | 64 +--- > include/configs/ma5d4evk.h | 255 +++++++++++++ > include/configs/smartweb.h | 14 +- > include/configs/vinco.h | 168 +++++++++ > 79 files changed, 1568 insertions(+), 602 deletions(-) > create mode 100644 arch/arm/mach-at91/clock.c > create mode 100644 board/denx/ma5d4evk/Kconfig > create mode 100644 board/denx/ma5d4evk/MAINTAINERS > create mode 100644 board/denx/ma5d4evk/Makefile > create mode 100644 board/denx/ma5d4evk/ma5d4evk.c > create mode 100644 board/l+g/vinco/Kconfig > create mode 100644 board/l+g/vinco/Makefile > create mode 100644 board/l+g/vinco/vinco.c > create mode 100644 configs/ma5d4evk_defconfig > create mode 100644 configs/vinco_defconfig > create mode 100644 include/configs/ma5d4evk.h > create mode 100644 include/configs/vinco.h > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
