During very early prototype-phase we did boot the AM335x boards
initially from CPSW-EMAC.
Now we don't need this feature anymore.
So we drop it to save MLO-space and having therefore a more quickly
boot.
Signed-off-by: Hannes Schmelzer <oe5...@oevsv.at>
---
board/BuR/common/common.c | 9 ++-------
include/configs/bur_am335x_common.h | 4 ----
2 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 441465c..ce4acc1 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -12,7 +12,6 @@
#include <version.h>
#include <common.h>
#include <errno.h>
-#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
@@ -640,8 +639,7 @@ static struct cpsw_platform_data cpsw_data = {
};
#endif /* CONFIG_DRIVER_TI_CPSW, ... */
-#if defined(CONFIG_DRIVER_TI_CPSW)
-
+#if defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
int board_eth_init(bd_t *bis)
{
int rv = 0;
@@ -658,8 +656,6 @@ int board_eth_init(bd_t *bis)
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
- (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
if (!getenv("ethaddr")) {
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_FDT)
printf("<ethaddr> not set. trying DTB ... ");
@@ -685,10 +681,9 @@ int board_eth_init(bd_t *bis)
printf("Error %d registering CPSW switch\n", rv);
return 0;
}
-#endif /* CONFIG_DRIVER_TI_CPSW, ... */
return rv;
}
-#endif /* CONFIG_DRIVER_TI_CPSW */
+#endif /* defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) */
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
diff --git a/include/configs/bur_am335x_common.h
b/include/configs/bur_am335x_common.h
index ffc6811..e666933 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -62,12 +62,8 @@
#define CONFIG_CMD_PING
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_MII /* Required in net/eth.c */
-#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_PHYLIB
#define CONFIG_PHY_NATSEMI
-#define CONFIG_SPL_NET_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */
-#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
/* Network console */
#define CONFIG_NETCONSOLE 1
#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
