Hi Andreas, On jeu., févr. 18 2016, Andreas Bießmann <andreas.de...@googlemail.com> wrote:
> Dear Gregory CLEMENT, > > Gregory CLEMENT <gregory.clem...@free-electrons.com> writes: >>The Versatile Industrial Communication platform is a community oriented >>board from Landis + Gyr. It comes with: >>- an RS-485 port >>- 2 Ethernet ports >>- a wireless M-BUS >>- a 4G modem >>- a 4MB SPI flash >>- a 4GB eMMC >> >>Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com> >>Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com> >>[rebase on current TOT] >>Signed-off-by: Andreas Bießmann <andreas.de...@googlemail.com> >>--- >> arch/arm/mach-at91/Kconfig | 6 ++ >> board/l+g/vinco/Kconfig | 12 +++ >> board/l+g/vinco/Makefile | 1 + >> board/l+g/vinco/vinco.c | 212 >> +++++++++++++++++++++++++++++++++++++++++++++ >> configs/vinco_defconfig | 13 +++ >> include/configs/vinco.h | 168 +++++++++++++++++++++++++++++++++++ >> 6 files changed, 412 insertions(+) >> create mode 100644 board/l+g/vinco/Kconfig >> create mode 100644 board/l+g/vinco/Makefile >> create mode 100644 board/l+g/vinco/vinco.c >> create mode 100644 configs/vinco_defconfig >> create mode 100644 include/configs/vinco.h > > applied to u-boot-atmel/master, thanks! > > I had to rebase and remove an empty newline at EOF > in vinco.h. Thanks! Gregory > > Best regards, > Andreas Bießmann -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
