Hi Bin,
On 15 February 2016 at 16:46, Bin Meng <bmeng...@gmail.com> wrote:
> Hi Jagan,
>
> On Mon, Feb 15, 2016 at 4:49 AM, Jagan Teki <jt...@openedev.com> wrote:
>> mp2580 will take care of tx and rx mode's so there is
>> no need to differentiate these into spi layer level
>> hence replaced all mode_rx macros with mode.
>>
>> Cc: Simon Glass <s...@chromium.org>
>> Cc: Bin Meng <bmeng...@gmail.com>
>> Cc: Mugunthan V N <mugunthan...@ti.com>
>> Cc: Michal Simek <michal.si...@xilinx.com>
>> Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
>> Signed-off-by: Jagan Teki <jt...@openedev.com>
>> ---
>> drivers/mtd/spi-nor/m25p80.c | 2 +-
>> drivers/spi/ich.c | 6 ++----
>> drivers/spi/spi-uclass.c | 11 ++++-------
>> drivers/spi/ti_qspi.c | 6 +++---
>> include/spi.h | 14 ++++----------
>> 5 files changed, 14 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/m25p80.c b/drivers/mtd/spi-nor/m25p80.c
>> index 7e2702d..58e879c 100644
>> --- a/drivers/mtd/spi-nor/m25p80.c
>> +++ b/drivers/mtd/spi-nor/m25p80.c
>> @@ -178,7 +178,7 @@ static int m25p80_spi_nor(struct spi_nor *nor)
>> return ret;
>> }
>>
>> - switch (spi->mode_rx) {
>> + switch (spi->mode) {
>> case SPI_RX_SLOW:
>> nor->read_mode = SNOR_READ;
>> break;
>> diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
>> index e543b8f..5f03508 100644
>> --- a/drivers/spi/ich.c
>> +++ b/drivers/spi/ich.c
>> @@ -678,10 +678,8 @@ static int ich_spi_child_pre_probe(struct udevice *dev)
>> * ICH 7 SPI controller only supports array read command
>> * and byte program command for SST flash
>> */
>> - if (plat->ich_version == PCHV_7) {
>> - slave->mode_rx = SPI_RX_SLOW;
>> - slave->mode = SPI_TX_BYTE;
>> - }
>> + if (plat->ich_version == PCHV_7)
>> + slave->mode = SPI_TX_BYTE | SPI_RX_SLOW;
>
> This won't apply. Please rebase this series on top of origin/master. I
> plan to give a test against this series soon.
Did that on u-boot-spi/spi-nor please find it.
>
>>
>> return 0;
>> }
>> diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
>> index 0dfdd8b..ed6c771 100644
>> --- a/drivers/spi/spi-uclass.c
>> +++ b/drivers/spi/spi-uclass.c
>> @@ -181,7 +181,6 @@ static int spi_child_pre_probe(struct udevice *dev)
>>
>> slave->max_hz = plat->max_hz;
>> slave->mode = plat->mode;
>> - slave->mode_rx = plat->mode_rx;
>>
>> return 0;
>> }
>> @@ -393,7 +392,7 @@ void spi_free_slave(struct spi_slave *slave)
>> int spi_slave_ofdata_to_platdata(const void *blob, int node,
>> struct dm_spi_slave_platdata *plat)
>> {
>> - int mode = 0, mode_rx = 0;
>> + int mode = 0;
>> int value;
>>
>> plat->cs = fdtdec_get_int(blob, node, "reg", -1);
>> @@ -425,24 +424,22 @@ int spi_slave_ofdata_to_platdata(const void *blob, int
>> node,
>> break;
>> }
>>
>> - plat->mode = mode;
>> -
>> value = fdtdec_get_uint(blob, node, "spi-rx-bus-width", 1);
>> switch (value) {
>> case 1:
>> break;
>> case 2:
>> - mode_rx |= SPI_RX_DUAL;
>> + mode |= SPI_RX_DUAL;
>> break;
>> case 4:
>> - mode_rx |= SPI_RX_QUAD;
>> + mode |= SPI_RX_QUAD;
>> break;
>> default:
>> error("spi-rx-bus-width %d not supported\n", value);
>> break;
>> }
>>
>> - plat->mode_rx = mode_rx;
>> + plat->mode = mode;
>>
>> return 0;
>> }
>> diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
>> index b5c974c..d9d65b4 100644
>> --- a/drivers/spi/ti_qspi.c
>> +++ b/drivers/spi/ti_qspi.c
>> @@ -338,7 +338,7 @@ static void ti_spi_setup_spi_register(struct
>> ti_qspi_priv *priv)
>> QSPI_SETUP0_NUM_D_BYTES_8_BITS |
>> QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
>> QSPI_NUM_DUMMY_BITS);
>> - slave->mode_rx = SPI_RX_QUAD;
>> + slave->mode |= SPI_RX_QUAD;
>> #else
>> memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
>> QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
>> @@ -422,7 +422,7 @@ static void __ti_qspi_setup_memorymap(struct
>> ti_qspi_priv *priv,
>> bool enable)
>> {
>> u32 memval;
>> - u32 mode = slave->mode_rx & (SPI_RX_QUAD | SPI_RX_DUAL);
>> + u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
>>
>> if (!enable) {
>> writel(0, &priv->base->setup0);
>> @@ -436,7 +436,7 @@ static void __ti_qspi_setup_memorymap(struct
>> ti_qspi_priv *priv,
>> memval |= QSPI_CMD_READ_QUAD;
>> memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
>> memval |= QSPI_SETUP0_READ_QUAD;
>> - slave->mode_rx = SPI_RX_QUAD;
>> + slave->mode |= SPI_RX_QUAD;
>> break;
>> case SPI_RX_DUAL:
>> memval |= QSPI_CMD_READ_DUAL;
>> diff --git a/include/spi.h b/include/spi.h
>> index dd0b11b..61fefa4 100644
>> --- a/include/spi.h
>> +++ b/include/spi.h
>> @@ -26,12 +26,10 @@
>> #define SPI_TX_BYTE BIT(8) /* transmit with 1 wire byte
>> */
>> #define SPI_TX_DUAL BIT(9) /* transmit with 2 wires */
>> #define SPI_TX_QUAD BIT(10) /* transmit with 4 wires */
>> -
>> -/* SPI mode_rx flags */
>> -#define SPI_RX_SLOW BIT(0) /* receive with 1 wire slow
>> */
>> -#define SPI_RX_FAST BIT(1) /* receive with 1 wire fast
>> */
>> -#define SPI_RX_DUAL BIT(2) /* receive with 2 wires */
>> -#define SPI_RX_QUAD BIT(3) /* receive with 4 wires */
>> +#define SPI_RX_SLOW BIT(11) /* receive with 1 wire slow
>> */
>> +#define SPI_RX_FAST BIT(12) /* receive with 1 wire fast
>> */
>> +#define SPI_RX_DUAL BIT(13) /* receive with 2 wires */
>> +#define SPI_RX_QUAD BIT(14) /* receive with 4 wires */
>>
>> /* SPI bus connection options - see enum spi_dual_flash */
>> #define SPI_CONN_DUAL_SHARED (1 << 0)
>> @@ -61,13 +59,11 @@ struct dm_spi_bus {
>> * @cs: Chip select number (0..n-1)
>> * @max_hz: Maximum bus speed that this slave can tolerate
>> * @mode: SPI mode to use for this device (see SPI mode flags)
>> - * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx flags)
>> */
>> struct dm_spi_slave_platdata {
>> unsigned int cs;
>> uint max_hz;
>> uint mode;
>> - u8 mode_rx;
>> };
>>
>> #endif /* CONFIG_DM_SPI */
>> @@ -94,7 +90,6 @@ struct dm_spi_slave_platdata {
>> * bus (bus->seq) so does not need to be stored
>> * @cs: ID of the chip select connected to the slave.
>> * @mode: SPI mode to use for this slave (see SPI mode flags)
>> - * @mode_rx: SPI RX mode to use for this slave (see SPI mode_rx
>> flags)
>> * @wordlen: Size of SPI word in number of bits
>> * @max_write_size: If non-zero, the maximum number of bytes which can
>> * be written at once, excluding command bytes.
>> @@ -112,7 +107,6 @@ struct spi_slave {
>> unsigned int cs;
>> #endif
>> uint mode;
>> - u8 mode_rx;
>> unsigned int wordlen;
>> unsigned int max_write_size;
>> void *memory_map;
>> --
>
thanks!
--
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
