Hi Marek, > Please just use mainline everything. If you use Arria V SoCDK, you can > just grab 2016.01 , compile it and write u-boot-with-spl-dtb.sfp to > offset 0x0 of the QSPI and it should just magically work.
I haven't found the file with the name u-boot-with-spl-dtb.sfp. denis@DendiMachine:~/WorkSpace/u-boot$ ls -l total 8544 drwxrwxr-x 2 denis denis 4096 lut 10 22:46 api drwxrwxr-x 17 denis denis 4096 lut 10 22:46 arch drwxrwxr-x 201 denis denis 4096 lut 10 22:46 board drwxrwxr-x 2 denis denis 4096 sty 11 23:15 build drwxrwxr-x 2 denis denis 12288 lut 11 10:50 cmd drwxrwxr-x 4 denis denis 20480 lut 11 10:50 common -rw-rw-r-- 1 denis denis 2260 sty 11 22:32 config.mk drwxrwxr-x 2 denis denis 61440 lut 10 22:46 configs drwxrwxr-x 2 denis denis 4096 lut 11 10:45 disk drwxrwxr-x 8 denis denis 4096 lut 10 22:46 doc drwxrwxr-x 46 denis denis 4096 lut 11 10:45 drivers drwxrwxr-x 2 denis denis 4096 lut 11 10:46 dts drwxrwxr-x 4 denis denis 4096 sty 11 22:32 examples drwxrwxr-x 12 denis denis 4096 lut 11 10:45 fs drwxrwxr-x 28 denis denis 12288 lut 11 10:45 include -rw-rw-r-- 1 denis denis 1863 sty 11 22:32 Kbuild -rw-rw-r-- 1 denis denis 7669 lut 10 22:46 Kconfig drwxrwxr-x 11 denis denis 4096 lut 11 10:50 lib drwxrwxr-x 2 denis denis 4096 lut 10 22:46 Licenses -rw-rw-r-- 1 denis denis 10765 lut 10 22:46 MAINTAINERS -rwxrwxr-x 1 denis denis 23247 sty 11 22:32 MAKEALL -rw-rw-r-- 1 denis denis 53021 lut 10 22:46 Makefile drwxrwxr-x 2 denis denis 4096 lut 11 10:46 net drwxrwxr-x 6 denis denis 4096 sty 11 22:32 post -rw-rw-r-- 1 denis denis 235198 lut 10 22:46 README drwxrwxr-x 4 denis denis 4096 lut 10 22:46 scripts -rw-rw-r-- 1 denis denis 17 sty 11 22:32 snapshot.commit drwxrwxr-x 11 denis denis 4096 lut 11 10:50 spl -rw-rw-r-- 1 denis denis 75047 lut 11 10:46 System.map drwxrwxr-x 10 denis denis 4096 lut 11 10:46 test drwxrwxr-x 15 denis denis 4096 lut 11 10:50 tools -rwxrwxr-x 1 denis denis 3492298 lut 11 10:50 u-boot -rw-rw-r-- 1 denis denis 431333 lut 11 10:50 u-boot.bin -rw-rw-r-- 1 denis denis 26288 lut 11 10:46 u-boot.cfg -rw-rw-r-- 1 denis denis 16301 lut 11 10:46 u-boot.dtb -rw-rw-r-- 1 denis denis 431333 lut 11 10:50 u-boot-dtb.bin -rw-rw-r-- 1 denis denis 431397 lut 11 10:46 u-boot-dtb.img -rw-rw-r-- 1 denis denis 431397 lut 11 10:50 u-boot.img -rw-rw-r-- 1 denis denis 1286 lut 11 10:46 u-boot.lds -rw-rw-r-- 1 denis denis 561107 lut 11 10:50 u-boot.map -rw-rw-r-- 1 denis denis 415032 lut 11 10:50 u-boot-nodtb.bin -rw-rw-r-- 1 denis denis 1245202 lut 11 10:46 u-boot.srec -rw-rw-r-- 1 denis denis 693541 lut 11 10:50 u-boot-with-spl.sfp denis@DendiMachine:~/WorkSpace/u-boot$ ls ./spl/ -l total 1292 drwxrwxr-x 3 denis denis 4096 lut 11 10:46 arch drwxrwxr-x 3 denis denis 4096 lut 11 10:46 board drwxrwxr-x 2 denis denis 4096 lut 11 10:46 cmd drwxrwxr-x 4 denis denis 4096 lut 11 10:46 common drwxrwxr-x 9 denis denis 4096 lut 11 10:46 drivers drwxrwxr-x 2 denis denis 4096 lut 11 10:46 dts drwxrwxr-x 2 denis denis 4096 lut 11 10:46 fs drwxrwxr-x 2 denis denis 4096 lut 11 10:45 include drwxrwxr-x 3 denis denis 4096 lut 11 10:50 lib -rwxrwxr-x 1 denis denis 932073 lut 11 10:50 u-boot-spl -rw-rw-r-- 1 denis denis 53943 lut 11 10:50 u-boot-spl.bin -rw-rw-r-- 1 denis denis 26129 lut 11 10:46 u-boot-spl.cfg -rw-rw-r-- 1 denis denis 903 lut 11 10:46 u-boot-spl.dtb -rw-rw-r-- 1 denis denis 53943 lut 11 10:50 u-boot-spl-dtb.bin -rw-rw-r-- 1 denis denis 1192 lut 11 10:46 u-boot-spl.lds -rw-rw-r-- 1 denis denis 137422 lut 11 10:50 u-boot-spl.map -rwxrwxr-x 1 denis denis 52880 lut 11 10:50 u-boot-spl-nodtb.bin -rw-rw-r-- 1 denis denis 160 lut 11 10:50 u-boot-spl-pad.bin -rw-rw-r-- 1 denis denis 65536 lut 11 10:50 u-boot-spl.sfp There is only target "u-boot-with-spl.sfp". I'm a little bit confused which file is the proper one. Can I use u-boot-with-spl.sfp from the root folder? >>> I was more interested in the procedure you used. I usually install mainline >>> U-Boot onto a board which boots from QSPI this way: >> >>> $ quartus_hps -c 1 -o PV -a 0x0 u-boot-with-spl-dtb.sfp >> >> Yes, exactly. But we have separated SPL and U-Boot images and put them >> separately (with two commands). > Please don't :-) Ok. Can you please briefly explain why? Best regards, Denis Bakhvalov _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
