There are uQE on ls1043ardb board, add uQE support for the board.
Call u_qe_init in ls1043ardb's board_init.
Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
---
Changes for v2:
- get qe_immr directly instead of qe_base
Changes for v3:
- NA
Changes for v4:
- NA
Changes for v5:
- rebase on patch http://patchwork.ozlabs.org/patch/572697/
- modify commit message
board/freescale/ls1043ardb/ls1043ardb.c | 8 ++++++++
drivers/qe/qe.c | 6 ++----
include/configs/ls1043ardb.h | 7 +++++++
3 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c
b/board/freescale/ls1043ardb/ls1043ardb.c
index c8f723a..2e61f3a 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -21,6 +21,10 @@
#include <environment.h>
#include <fsl_sec.h>
#include "cpld.h"
+#ifdef CONFIG_U_QE
+#include <fsl_qe.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
@@ -113,6 +117,10 @@ int board_init(void)
enable_layerscape_ns_access();
#endif
+#ifdef CONFIG_U_QE
+ u_qe_init();
+#endif
+
return 0;
}
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 2a9e61b..8a432a8 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -192,8 +192,7 @@ void qe_init(uint qe_base)
#ifdef CONFIG_U_QE
void u_qe_init(void)
{
- uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */
- qe_immr = (qe_map_t *)qe_base;
+ qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
@@ -204,9 +203,8 @@ void u_qe_init(void)
void u_qe_resume(void)
{
qe_map_t *qe_immrr;
- uint qe_base = CONFIG_SYS_IMMR + QE_IMMR_OFFSET; /* QE immr base */
- qe_immrr = (qe_map_t *)qe_base;
+ qe_immrr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
u_qe_firmware_resume((const void *)CONFIG_SYS_QE_FW_ADDR, qe_immrr);
out_be32(&qe_immrr->iram.iready, QE_IRAM_READY);
}
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 506f50d..bc40b06 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -268,6 +268,13 @@
#define CONFIG_ETHPRIME "FM1@DTSEC3"
#endif
+/* QE */
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+ !defined(CONFIG_QSPI_BOOT)
+#define CONFIG_U_QE
+#endif
+#define CONFIG_SYS_QE_FW_ADDR 0x60600000
+
/* USB */
#define CONFIG_HAS_FSL_XHCI_USB
#ifdef CONFIG_HAS_FSL_XHCI_USB
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
