No special reason for the current stack address 0x0ff08000.
Change it to 0x00100000 to simplify the init_page_table.
There are two types of SoCs in terms of the load address of SPL.
[1] PH1-sLD3, PH1-LD4, PH1-sLD8
SPL is loaded at 0x00040000-0x0004ffff
[2] PH1-Pro4, PH1-Pro5, ProXstream2, PH1-LD6b
SPL is loaded at 0x00100000-0x0010ffff
The new stack area (0x000f8000-0x00100000) should be safe for all the
cases.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm/mach-uniphier/init_page_table.S | 5 +----
include/configs/uniphier.h | 2 +-
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-uniphier/init_page_table.S
b/arch/arm/mach-uniphier/init_page_table.S
index 2d3ad15..4ed2656 100644
--- a/arch/arm/mach-uniphier/init_page_table.S
+++ b/arch/arm/mach-uniphier/init_page_table.S
@@ -13,15 +13,12 @@
#define DEVICE 0x00002002 /* Non-shareable Device */
#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
-#define TEXT_SECTION ((CONFIG_SPL_TEXT_BASE) >> (SECTION_SHIFT))
-#define STACK_SECTION ((CONFIG_SPL_STACK) >> (SECTION_SHIFT))
-
.section ".rodata"
.align 14
ENTRY(init_page_table)
section = 0
.rept NR_SECTIONS
- .if section == 0 || section == 1 || section == STACK_SECTION
+ .if section == 0 || section == 1
attr = NORMAL
.else
attr = DEVICE
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 8856044..93e1919 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -252,7 +252,7 @@
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
-#define CONFIG_SPL_STACK (0x0ff08000)
+#define CONFIG_SPL_STACK (0x00100000)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
#define CONFIG_PANIC_HANG
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
