Since commit ad1ecd2063da ("fdt: Build a U-Boot binary without device
tree") and commit 03c25bcd263a ("fdt: Build an SPL binary without
device tree"), we can use shorter file names for the output images.The default configuration for UniPhier SoCs enables CONFIG_OF_SEPARATE and CONFIG_SPL_OF_CONTROL. In this case, spl/u-boot-spl-dtb.bin is the same as spl/u-boot-spl.bin. Likewise, u-boot-dtb.img is the same as u-boot.img. So, this change of the flow has no impact. Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com> --- doc/README.uniphier | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/doc/README.uniphier b/doc/README.uniphier index bce70cf..bcf0ac3 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -68,8 +68,8 @@ Burn U-Boot images to NAND -------------------------- Write two files to the NAND device as follows: - - spl/u-boot-spl-dtb.bin at the offset address 0x00000000 - - u-boot-dtb.img at the offset address 0x00010000 + - spl/u-boot-spl.bin at the offset address 0x00000000 + - u-boot.img at the offset address 0x00010000 If a TFTP server is available, the images can be easily updated. Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public @@ -145,4 +145,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most of the boards. -- Masahiro Yamada <yamada.masah...@socionext.com> -Aug. 2015 +Feb. 2016 -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
