On 01/25/2016 09:40 PM, Qianyu Gong wrote: > >> -----Original Message----- >> From: Scott Wood [mailto:o...@buserror.net] >> Sent: Tuesday, January 26, 2016 1:17 AM >> To: Qianyu Gong <qianyu.g...@nxp.com>; u-boot@lists.denx.de >> Cc: b07...@freescale.com; Shaohui Xie <shaohui....@nxp.com> >> Subject: Re: [U-Boot] [Patch V3 2/3] fm: fdt: Move fman ucode fixup to Fman >> driver code >> >> On Mon, 2016-01-25 at 19:37 +0800, Gong Qianyu wrote: >>> Both Freescale Layerscape and powerpc/mpc85xx platforms are using >>> fdt_fixup_fman_firmware() to insert Fman ucode blob into the device >>> tree. So move the function to driver code. >>> >>> Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com> >>> --- >>> V3: >>> - Remove file changes about "qe.h". >>> (Should be put in the first patch of this patchset) >>> V2: >>> - New patch. >>> >>> arch/powerpc/cpu/mpc85xx/fdt.c | 125 >>> ++------------------------------------ >>> - >>> drivers/net/fm/Makefile | 1 + >>> drivers/net/fm/fdt.c | 129 >>> +++++++++++++++++++++++++++++++++++++++++ >>> include/fsl_fman.h | 1 + >>> 4 files changed, 136 insertions(+), 120 deletions(-) >> >> Again, pass -M -C to git format-patch. >> >> -Scott > > I don't understand but I've already used "git format-patch -M -C --stat ...". >
Scott means using -M and -C, git should detect the moving instead of adding and deleting the same code. Try to add --find-copies-harder to see if it generates a smaller patch. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
