From: Shaohui Xie <shaohui....@nxp.com>
Cortina phy cannot support soft reset, this commit implements probe
for Cortina PHY to tell phylib to skip phy soft reset by setting
PHY_FLAG_BROKEN_RESET in flags.
Signed-off-by: Shaohui Xie <shaohui....@nxp.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
---
changes in v2:
1. use PHY_FLAG_BROKEN_RESET instead of PHY_BROKEN_RESET
drivers/net/phy/cortina.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
index 3a2b3bb..ba1157f 100644
--- a/drivers/net/phy/cortina.c
+++ b/drivers/net/phy/cortina.c
@@ -256,6 +256,12 @@ int cs4340_config(struct phy_device *phydev)
return 0;
}
+int cs4340_probe(struct phy_device *phydev)
+{
+ phydev->flags = PHY_FLAG_BROKEN_RESET;
+ return 0;
+}
+
int cs4340_startup(struct phy_device *phydev)
{
phydev->link = 1;
@@ -275,6 +281,7 @@ struct phy_driver cs4340_driver = {
MDIO_DEVS_PHYXS | MDIO_DEVS_AN |
MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2),
.config = &cs4340_config,
+ .probe = &cs4340_probe,
.startup = &cs4340_startup,
.shutdown = &gen10g_shutdown,
};
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
