If the USB EHCI is configured for little endian MMIO, make sure to
clear the USBMODE_BE flag from the USBMODE register.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
Cc: Hans de Goede <hdego...@redhat.com>
---
drivers/usb/host/ehci-hcd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b3eb08d..8f259be 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -134,6 +134,8 @@ static void ehci_set_usbmode(struct ehci_ctrl *ctrl)
tmp |= USBMODE_CM_HC;
#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
tmp |= USBMODE_BE;
+#else
+ tmp &= ~USBMODE_BE;
#endif
ehci_writel(reg_ptr, tmp);
}
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
