On 16-01-26 05:35 PM, Marek Vasut wrote:
On Wednesday, January 27, 2016 at 01:35:55 AM, Steve Rae wrote:
Hi Marek & Lukasz,
I have an issue running fastboot on my board (which is USB_SPEED_HIGH):
=> fastboot0
failed to enable in ep
failed to enable in ep
failed to enable in ep
Because of this, fastboot does not even initialize properly, and I need
to "^C" to break out…
I have traced this the following code in
"drivers/usb/gadget/dwc2_udc_otg.c":
I will have to delegate this onto Lukasz, since he's the s3c gadget expert.
Take a look at:
[PATCH 1/2] usb: gadget: s3c_udc_otg: fixed max packet size check for ep_in in
high speed
Best regards,
Marek Vasut
yes - I think that 'patchwork.ozlabs.org/patch/560029' would resolve my
issue
Thanks, Steve
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
