use "#ifdef CONFIG_QE" to mask the codes
not used for micro QE
Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
---
Changes for v2:
- this patch is new added to this patchset
drivers/qe/qe.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 08620b2..2a9e61b 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -20,7 +20,9 @@
#define MPC85xx_DEVDISR_QE_DISABLE 0x1
qe_map_t *qe_immr = NULL;
+#ifdef CONFIG_QE
static qe_snum_t snums[QE_NUM_OF_SNUM];
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -81,6 +83,7 @@ void *qe_muram_addr(uint offset)
return (void *)&qe_immr->muram[offset];
}
+#ifdef CONFIG_QE
static void qe_sdma_init(void)
{
volatile sdma_t *p;
@@ -184,6 +187,7 @@ void qe_init(uint qe_base)
qe_sdma_init();
qe_snums_init();
}
+#endif
#ifdef CONFIG_U_QE
void u_qe_init(void)
@@ -214,6 +218,7 @@ void qe_reset(void)
(u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
+#ifdef CONFIG_QE
void qe_assign_page(uint snum, uint para_ram_base)
{
u32 cecr;
@@ -229,6 +234,7 @@ void qe_assign_page(uint snum, uint para_ram_base)
return;
}
+#endif
/*
* brg: 0~15 as BRG1~BRG16
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
