On 01/21/2016 09:48 PM, ying.zh...@freescale.com wrote: > From: Ying Zhang <b40...@freescale.com> > > The fuse status register provides the values from on-chip > voltage ID efuses programmed at the factory. > These values define the voltage requirements for > the chip. u-boot reads FUSESR and translates the values > into the appropriate commands to set the voltage output > value of an external voltage regulator. > > Signed-off-by: Ying Zhang <b40...@freescale.com> > --- > Changed from v2: > - Split the Intel mode support patch > Changed from v1: > - Not support IR chip is used in AMD mode > ---
Revised subject and slightly reformat commit message powerpc/board/t4240rdb: Enable VID support The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. Applied to u-boot-mpc85xx master branch. Awaiting upstream. Thanks. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
