Hi Ladis, 2016-01-25 16:56 GMT+01:00 Ladislav Michl <la...@linux-mips.org>: > Hi Enric, > > On Mon, Jan 25, 2016 at 08:26:23AM +0100, Enric Balletbo Serra wrote: >> The ROM boot on OMAP reads the first 4 blocks searching for the SPL, >> in production is a practice flash the SPL 4 times. OneNAND/NAND >> devices can have different block sizes and the OMAP ROM boot supports >> block sizes from 64KB to 512K. For IGEP boards in particular, at least >> there are boards that have block size of 128K and 256K. What I would >> meant here is set as default the mtdparts variable to reserve 2M for >> SPL, just to cover all the cases. >> >> mtdparts=mtdparts=gpmc-nand.0:2m(SPL),-(UBI)\0 > > So far there was no ack or nack to yesterday's proposal making that > dynamic; Both boot ROM and ubispl code thinks in terms of eraseblocks, > only mtd needs fixed offset. So I'd like to see this offset calculated as > 4*block_size, not some "worst case" value... > > ladis
Your proposal looks good to me. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot