Use definitions from ehci.h instead.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikow...@gmail.com>
Acked-by: Marek Vasut <ma...@denx.de>
---
Changes in v2:
- Add Acked-by
Changes in v1: None
drivers/usb/host/ehci-mpc512x.c | 4 ++--
include/usb/ehci-ci.h | 4 ----
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ehci-mpc512x.c b/drivers/usb/host/ehci-mpc512x.c
index 4b50ac8..bb4f461 100644
--- a/drivers/usb/host/ehci-mpc512x.c
+++ b/drivers/usb/host/ehci-mpc512x.c
@@ -93,7 +93,7 @@ static int reset_usb_controller(volatile struct usb_ehci
*ehci)
unsigned int i;
/* Command a reset of the USB Controller */
- out_be32(&(ehci->usbcmd), EHCI_FSL_USBCMD_RST);
+ out_be32(&(ehci->usbcmd), CMD_RESET);
/* Wait for the reset process to finish */
for (i = 65535 ; i > 0 ; i--) {
@@ -101,7 +101,7 @@ static int reset_usb_controller(volatile struct usb_ehci
*ehci)
* The host will set this bit to zero once the
* reset process is complete
*/
- if ((in_be32(&(ehci->usbcmd)) & EHCI_FSL_USBCMD_RST) == 0)
+ if ((in_be32(&(ehci->usbcmd)) & CMD_RESET) == 0)
return 0;
}
diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h
index 305b180..586d32a 100644
--- a/include/usb/ehci-ci.h
+++ b/include/usb/ehci-ci.h
@@ -97,10 +97,6 @@
#define INTR_DATA_PULSING_EN (0x1<<30)
#define INTSTS_MASK (0x00ff0000)
-/* USBCMD Bits of interest */
-#define EHCI_FSL_USBCMD_RST (1 << 1)
-#define EHCI_FSL_USBCMD_RS (1 << 0)
-
#define INTERRUPT_ENABLE_BITS_MASK \
(INTR_USB_ID_EN | \
INTR_1MS_TIMER_EN | \
--
2.5.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
