We must use the console name in the 'stdout' variable to select the one
we want. At present the name is formed from the driver name with a suffix
indicating the rotation value.
It seems better to name them sequentially since this can be controlled by
driver order. So adjust the code to use 'vidconsole' for the first,
'vidconsole1' for the second, etc.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2: None
drivers/video/vidconsole-uclass.c | 7 ++++++-
include/configs/sandbox.h | 8 ++++----
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/video/vidconsole-uclass.c
b/drivers/video/vidconsole-uclass.c
index ea10189..706a189 100644
--- a/drivers/video/vidconsole-uclass.c
+++ b/drivers/video/vidconsole-uclass.c
@@ -161,7 +161,12 @@ static int vidconsole_post_probe(struct udevice *dev)
struct stdio_dev *sdev = &priv->sdev;
int ret;
- strlcpy(sdev->name, dev->name, sizeof(sdev->name));
+ if (dev->seq) {
+ snprintf(sdev->name, sizeof(sdev->name), "vidconsole%d",
+ dev->seq);
+ } else {
+ strcpy(sdev->name, "vidconsole");
+ }
sdev->flags = DEV_FLAGS_OUTPUT;
sdev->putc = vidconsole_putc;
sdev->puts = vidconsole_puts;
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 6498981..4bffd8d 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -169,12 +169,12 @@
#define CONFIG_KEYBOARD
#define SANDBOX_SERIAL_SETTINGS
"stdin=serial,cros-ec-keyb,usbkbd\0" \
- "stdout=serial,lcd.vidconsole\0" \
- "stderr=serial,lcd.vidconsole\0"
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
#else
#define SANDBOX_SERIAL_SETTINGS "stdin=serial\0" \
- "stdout=serial,lcd.vidconsole\0" \
- "stderr=serial,lcd.vidconsole\0"
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
#endif
#define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \
--
2.7.0.rc3.207.g0ac5344
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
