> -----Original Message-----
> From: york sun [mailto:york....@nxp.com]
> Sent: Thursday, January 14, 2016 11:37 PM
> To: Prabhakar Kushwaha <prabha...@freescale.com>; u-boot@lists.denx.de
> Cc: Scott Wood <o...@buserror.net>
> Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env variable
> 
> On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
> > kernel_size env variable is defined as 0x28000000, it is beyond NOR
> > flash.
> >
> > Update kernel_size with 40MB kernel size.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
> > ---
> >  include/configs/ls2080aqds.h | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/include/configs/ls2080aqds.h
> > b/include/configs/ls2080aqds.h index ba84248..a402c06 100644
> > --- a/include/configs/ls2080aqds.h
> > +++ b/include/configs/ls2080aqds.h
> > @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
> >     "initrd_high=0xffffffffffffffff\0"      \
> >     "kernel_start=0x581100000\0"            \
> >     "kernel_load=0xa0000000\0"              \
> > -   "kernel_size=0x28000000\0"
> > +   "kernel_size=0x2800000\0"
> >
> >  #ifdef CONFIG_FSL_MC_ENET
> >  #define CONFIG_FSL_MEMAC
> >
> Prabhakar,
> 
> I am tired of these changes. Can you go over all the default settings and
> verify they all make sense? 

I agree.

Let me review all settings and provide one patch to fix all of them at once.
Do you want to hold this patch till I check and provide patch (if required)

>A short while ago Scott found fdt_high was not  correct.

Is this change part of code or not?

--prabhakar




_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to