While we transition to using driver model for video, we need to support both options.
Signed-off-by: Simon Glass <s...@chromium.org> --- arch/arm/mach-tegra/board2.c | 8 ++++++-- include/configs/tegra-common-post.h | 10 ++++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 6e36dce..0565a61 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -139,8 +139,10 @@ int board_init(void) if (pwm_init(gd->fdt_blob)) debug("%s: Failed to init pwm\n", __func__); #endif -#ifdef CONFIG_LCD +#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO) pin_mux_display(); +#endif +#ifdef CONFIG_LCD tegra_lcd_check_next_stage(gd->fdt_blob, 0); #endif /* boot param addr */ @@ -169,11 +171,13 @@ int board_init(void) pin_mux_usb(); #endif -#ifdef CONFIG_LCD +#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO) board_id = tegra_board_id(); err = tegra_lcd_pmic_init(board_id); if (err) return err; +#endif +#ifdef CONFIG_LCD tegra_lcd_check_next_stage(gd->fdt_blob, 0); #endif diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 68da23e..b6b8ffc 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -53,6 +53,12 @@ #define STDOUT_LCD "" #endif +#ifdef CONFIG_DM_VIDEO +#define STDOUT_VIDEO ",vidconsole" +#else +#define STDOUT_VIDEO "" +#endif + #ifdef CONFIG_CROS_EC_KEYB #define STDOUT_CROS_EC ",cros-ec-keyb" #else @@ -61,8 +67,8 @@ #define TEGRA_DEVICE_SETTINGS \ "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB STDOUT_CROS_EC "\0" \ - "stdout=serial" STDOUT_LCD "\0" \ - "stderr=serial" STDOUT_LCD "\0" \ + "stdout=serial" STDOUT_LCD STDOUT_VIDEO "\0" \ + "stderr=serial" STDOUT_LCD STDOUT_VIDEO "\0" \ "" #ifndef BOARD_EXTRA_ENV_SETTINGS -- 2.6.0.rc2.230.g3dd15c0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot