Hi, does anybody have some D-Cache enable code for ARM he likes to share?
I'm thinking about some generic code which takes MMU configuration from board config and sets up a 16k first level page table (1MB only pages). With this, D-Cache can be enabled for the specified memory regions and is flushed/disabled again before U-Boot exit. MMU config entries in board config could look like CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY( \ <physical/virtual base address>, // 1:1 mapping \ <size in MB>, \ <cacheable/noncachable>, \ <bufferable/nonbufferable> ) E.g. CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY(0x000, 16, NONCACHEABLE, NONBUFFERABLE) // 16MB NOR CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY(0x100, 128, CACHEABLE, BUFFERABLE) // 128 MB RAM CONFIG_ARM_MMU_FIRST_LEVEL_ENTRY(0xF00, 1, NONCACHEABLE, NONBUFFERABLE) // 1MB register window Having only a 1:1 mapping (physical/virtual) would be sufficient in a first step, as we are only interested in D-Cache support here (using the same memory map as currently done without MMU). Opinions? Best regards Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
