Hello Albert,
Am 12.01.2016 um 15:25 schrieb Albert ARIBAUD:
Hello Heiko,
On Tue, 12 Jan 2016 11:48:17 +0100, Heiko Schocher <h...@denx.de> wrote:
Hello Albert,
Am 12.01.2016 um 11:26 schrieb Albert ARIBAUD:
(cc:ing Heiko as the maintainer for axm/taurus)
Hello,
AXM is currently the only board failing 'buildman arm aarch64':
+arm-unknown-linux-gnueabi-ld.bfd: SPL image too big
+make[2]: *** [spl/u-boot-spl] Error 1
+make[1]: *** [spl/u-boot-spl] Error 2
+make: *** [sub-make] Error 2
Apparently SPL is already being built in Thumb instruction set, so no
way to gain anything that way.
I know, it was tricky to get SPL into 4k ...
What else can we do to get SPL size back under limit?
Hmm.. what is your exact toolchain?
I tested with the buildman-fetched gcc, -v gives 'gcc version 4.9.0
(GCC)'.
I've deleted the toolchain and re-fetched it again through buildman in
case there was an issue with the install, and am getting the same
result.
I've also tested with the latest ARM gcc package available with Ubuntu,
that is, 'gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu1)', again
with the same result.
I see for the axm board:
With eldk-5.4
pollux:u-boot-smartweb hs [master] $ arm-linux-gnueabi-size u-boot
text data bss dec hex filename
212583 23792 23552 259927 3f757 u-boot
pollux:u-boot-smartweb hs [master] $ arm-linux-gnueabi-size spl/u-boot-spl
text data bss dec hex filename
14568 1212 1140 16920 4218 spl/u-boot-spl
pollux:u-boot-smartweb hs [master] $
Confirmed right now that with eldk 5.4's gcc 4.7.2 axm builds fine.
With eldk-5.5
pollux:u-boot-smartweb hs [master] $ arm-linux-gnueabi-size u-boot
text data bss dec hex filename
210690 23672 23556 257918 3ef7e u-boot
pollux:u-boot-smartweb hs [master] $ arm-linux-gnueabi-size spl/u-boot-spl
text data bss dec hex filename
14472 1212 1140 16824 41b8 spl/u-boot-spl
pollux:u-boot-smartweb hs [master] $
Confirmed right now that with eldk 5.5's (or 5.5.3's) gcc 4.8.1 axm
builds fine.
The issue appears with gcc 4.9 and 5.2.1 (and I suspect any version
between 4.9 and 5.2.1 and beyond 5.2.1)
Yes :-(
Tested with linaro 5.2 using:
hs@localhost:u-boot [master] $ arm-unknown-linux-gnueabi-gcc --version
arm-unknown-linux-gnueabi-gcc (crosstool-NG 1.21.0) 5.2.1 20151005
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
hs@localhost:u-boot [master] $
and size is:
hs@localhost:u-boot [master] $ arm-unknown-linux-gnueabi-size spl/u-boot-spl
text data bss dec hex filename
14734 1212 1140 17086 42be spl/u-boot-spl
hs@localhost:u-boot [master] $
aprox 0x100 bigger than with eldk-5.5 ... :-(
But I have only 16k sram on at91sam9g20 ... Ok, there are 2 such
areas, but between them is a hole :-( damn...
Adding Andreas to cc, may he has an idea?
Do gcc 4.9 need other settings for optimizing code?
bye,
Heiko
--
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
