Hi Bhuvanchandra, On Tue, Jan 12, 2016 at 2:43 PM, Bhuvanchandra DV <bhuvanchandra...@toradex.com> wrote: > Hi Bin, > > > On 01/12/2016 11:05 AM, Bin Meng wrote: >> >> Hi Bhuvanchandra, >> >> On Tue, Jan 12, 2016 at 12:28 PM, Bhuvanchandra DV >> <bhuvanchandra...@toradex.com> wrote: >>> >>> - Convert lpuart driver to driver model and remove the legacy code. >>> - Update Toradex Colibri VF50/VF61 serial support with driver model. >>> - Update Freescale vf610twr serial support with driver model. >>> - Update Freescale ls1021atwr serial support with driver model. >>> - Update Phytec pcm052 serial support with driver model. >>> - Tested the driver on Toradex Colibri VF50/VF61 hardware. >>> - Compile checked board files for vf610twr, ls1021atwr and pcm052 >>> since I don't have access to such hardware at my end. Reviewers >>> and testers welcome! >>> >>> Bhuvanchandra DV (8): >>> dm: lpuart: Add driver model support for the serial driver >>> colibri_vf: Update enabling lpuart support with driver model >>> arm: vf610twr: Add driver model support >>> vf610twr: Update enabling lpuart with driver model >>> arm: ls102xa: Add driver model support >>> ls1021x: Update enabling lpuart with driver model >>> arm: pcm052: Enable driver model support >>> pcm052: Update enabling lpuart support with driver model >>> >>> arch/arm/include/asm/arch-ls102xa/serial.h | 16 ++++ >>> arch/arm/include/asm/arch-vf610/serial.h | 16 ++++ >>> board/freescale/ls1021atwr/ls1021atwr.c | 15 ++- >>> board/freescale/vf610twr/vf610twr.c | 13 +++ >>> board/phytec/pcm052/pcm052.c | 13 +++ >>> board/toradex/colibri_vf/colibri_vf.c | 13 +++ >>> configs/ls1021atwr_nor_lpuart_defconfig | 1 + >>> configs/pcm052_defconfig | 1 + >>> configs/vf610twr_defconfig | 1 + >>> configs/vf610twr_nand_defconfig | 1 + >>> drivers/serial/Kconfig | 6 ++ >>> drivers/serial/serial_lpuart.c | 148 >>> +++++++++++++++-------------- >>> include/configs/colibri_vf.h | 6 +- >>> include/configs/ls1021atwr.h | 1 + >>> include/configs/pcm052.h | 6 +- >>> include/configs/vf610twr.h | 6 +- >>> 16 files changed, 180 insertions(+), 83 deletions(-) >>> create mode 100644 arch/arm/include/asm/arch-ls102xa/serial.h >>> create mode 100644 arch/arm/include/asm/arch-vf610/serial.h >>> >>> -- >> >> >> Please see existing patch series @ >> http://patchwork.ozlabs.org/patch/561855/. You can drop the ls102xa >> changes and rebase your patch series on top of that. Thanks! > > > We are not aware of this patch set, sorry! about that. You want me to drop > only the ls102xa changes? How about the changes/updates to the lpuart > driver? should i update them with your device tree support stuff and rebase > the remaining patch set along with your Signed-off-by tag ? > Any suggestions ? >
I believe you can: - Drop the LPUART DM conversion patch in your series, which was already done - Drop the ls1021atwr changes, which was already done - Do the similar changes to all other boards in your series, by following ls1021atwr changes in my series - There is no need to add my SOB tag in your series as I was actually not doing anything :) Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
