Prepare sub-folder for device-tree files. Make support for
device-tree on MIPS available in Kbuild/Kconfig.
Signed-off-by: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
Signed-off-by: Purna Chandra Mandal <purna.man...@microchip.com>
---
Changes in v3:
- keep section .dtb.init.rodata during link in case of CONFIG_OF_EMBED, .dtb
only
does not work
Changes in v2:
- add arch/mips/dts to clean list in dts/Makefile
- keep section .dtb during link in case of CONFIG_OF_EMBED
arch/Kconfig | 1 +
arch/mips/config.mk | 1 +
arch/mips/dts/.gitignore | 1 +
arch/mips/dts/Makefile | 16 ++++++++++++++++
arch/mips/dts/skeleton.dtsi | 23 +++++++++++++++++++++++
dts/Makefile | 2 +-
6 files changed, 43 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/dts/.gitignore
create mode 100644 arch/mips/dts/Makefile
create mode 100644 arch/mips/dts/skeleton.dtsi
diff --git a/arch/Kconfig b/arch/Kconfig
index 1709d40..ec12013 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -55,6 +55,7 @@ config MIPS
select HAVE_PRIVATE_LIBGCC
select HAVE_GENERIC_BOARD
select SYS_GENERIC_BOARD
+ select SUPPORT_OF_CONTROL
config NDS32
bool "NDS32 architecture"
diff --git a/arch/mips/config.mk b/arch/mips/config.mk
index 415ec8a..b78d495 100644
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
@@ -72,6 +72,7 @@ PF_ABICALLS := -mabicalls
PF_PIC := -fpic
PF_PIE := -pie
PF_OBJCOPY := -j .got -j .u_boot_list -j .rel.dyn -j
.padding
+PF_OBJCOPY += -j .dtb.init.rodata
endif
PLATFORM_CPPFLAGS += -G 0 $(PF_ABICALLS) $(PF_PIC)
diff --git a/arch/mips/dts/.gitignore b/arch/mips/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/mips/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
new file mode 100644
index 0000000..47b6eb5
--- /dev/null
+++ b/arch/mips/dts/Makefile
@@ -0,0 +1,16 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+dtb-y +=
+
+targets += $(dtb-y)
+
+# Add any required device tree compiler flags here
+DTC_FLAGS +=
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
diff --git a/arch/mips/dts/skeleton.dtsi b/arch/mips/dts/skeleton.dtsi
new file mode 100644
index 0000000..24ee6c3
--- /dev/null
+++ b/arch/mips/dts/skeleton.dtsi
@@ -0,0 +1,23 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value. The bootloader will typically populate the memory
+ * node.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
+ aliases {
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+};
diff --git a/dts/Makefile b/dts/Makefile
index d3122aa..c4ac153 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -45,4 +45,4 @@ dtbs: $(obj)/dt.dtb
clean-files := dt.dtb.S
# Let clean descend into dts directories
-subdir- += ../arch/arm/dts ../arch/microblaze/dts ../arch/sandbox/dts
../arch/x86/dts
+subdir- += ../arch/arm/dts ../arch/microblaze/dts ../arch/mips/dts
../arch/sandbox/dts ../arch/x86/dts
--
2.5.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
