Tom,
Please note that subject shows u-boot-spi/next but it actually
u-boot-spi/master and of course PR shows the repo as master (not
next).
On 30 December 2015 at 16:01, Jagan Teki <jt...@openedev.com> wrote:
> Hi Tom,
>
> Please pull this PR.
>
> thanks!
> Jagan.
>
> The following changes since commit 312db9f75f50b339310474d72c8524cef2bd7931:
>
> armv7: omap-common: Rework SPL board_mmc_init() (2015-12-14 13:42:54 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-spi.git master
>
> for you to fetch changes up to 25aade812e40f2e869575199c64e35ebcdf5554b:
>
> defconfig: am437x_sk_evm: enable spi driver model (2015-12-29 13:27:46
> +0530)
>
> ----------------------------------------------------------------
> Jagan Teki (24):
> sf: Get spi locally from spi_flash
> spi: make mode visible to both dm and non-dm
> spi: Use mode instead of op_mode_tx
> spi: Rename SPI_TX_BP|QPP to SPI_TX_BYTE|QUAD
> sf: Move spi_read_cmds_array locally
> sf: Rename spi_flash_set_* functions
> sf: Rename bank_end to bar_end in read_bar
> sf: Remove spi_flash_remove
> sf: Minor cleanup
> sf: Use BIT macro
> sf: Fix quad bit set for micron devices
> sf: Read back and check once spansion quad bit set
> sf: Read back and check once macronix quad bit set
> sf: Write quad bit along with read status
> spi: Remove SPI_OPM_RX_EXTN
> spi: Remove SPI_OPM_RX_DIO|QIOF
> spi: Rename SPI_OPM_RX_* to SPI_RX_*
> spi: Rename op_mode_rx to mode_rx
> spi: Move flags macro's to spi_slave{} members
> spi: Fix bit assignment with flags
> spi: Use BIT macro
> spi: Minor cleanup
> sf: Make IO modes at last in read modes
> spi: Add SPI_TX_DUAL mode
>
> Mugunthan V N (17):
> drivers: spi: ti_qspi: do not hard code chip select for memory map
> configuration
> drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver
> model conversion
> drivers: spi: ti_qspi: prepare driver for DM conversion
> dm: core: Add a new api to get indexed device address
> spi: Add support for dual and quad mode
> dra7xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl
> dts: dra7: add spi alias for qspi
> drivers: spi: ti_qspi: convert driver to adopt device driver model
> arm: dts: dra7: add qspi register maps for memory map and control module
> arm: dts: am437x-gp-evm: add spi-flash comaptible for flash
> arm: dts: dra7-evm: add spi-flash comaptible for flash
> arm: dts: dra72-evm: add spi-flash comaptible for flash
> defconfig: dra72_evm: enable spi driver model
> defconfig: dra74_evm: enable spi driver model
> am43xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl
> arm: dts: am4372: add qspi register maps for memory map
> defconfig: am437x_sk_evm: enable spi driver model
>
> arch/arm/dts/am4372.dtsi | 5 +-
> arch/arm/dts/am437x-sk-evm.dts | 2 +-
> arch/arm/dts/dra7-evm.dts | 2 +-
> arch/arm/dts/dra7.dtsi | 8 +-
> arch/arm/dts/dra72-evm.dts | 2 +-
> configs/am437x_sk_evm_defconfig | 3 +
> configs/dra72_evm_defconfig | 2 +
> configs/dra74_evm_defconfig | 2 +
> drivers/core/device.c | 31 ++-
> drivers/mtd/spi/sf-uclass.c | 7 +-
> drivers/mtd/spi/sf_internal.h | 55 +++--
> drivers/mtd/spi/sf_probe.c | 2 +-
> drivers/mtd/spi/spi_flash.c | 185 +++++++++-----
> drivers/spi/ich.c | 4 +-
> drivers/spi/spi-uclass.c | 38 ++-
> drivers/spi/ti_qspi.c | 524
> ++++++++++++++++++++++++++++------------
> include/configs/am43xx_evm.h | 2 +
> include/configs/dra7xx_evm.h | 5 +
> include/dm/device.h | 11 +
> include/spi.h | 75 +++---
> include/spi_flash.h | 2 -
> 21 files changed, 667 insertions(+), 300 deletions(-)
thanks!
--
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
