This patch moves flags macro's to respective member
position on spi_slave{}, for better readabilty and
finding the respective member macro's easily.
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Michal Simek <michal.si...@xilinx.com>
Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
Tested-by: Mugunthan V N <mugunthan...@ti.com>
Tested-by: Jagan Teki <jt...@openedev.com>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
include/spi.h | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/include/spi.h b/include/spi.h
index 8dabc3d..de09ac5 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -26,14 +26,6 @@
#define SPI_TX_BYTE 0x100 /* transmit with 1 wire byte */
#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
-/* SPI transfer flags */
-#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
-#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
-#define SPI_XFER_MMAP 0x08 /* Memory Mapped start */
-#define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */
-#define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END)
-#define SPI_XFER_U_PAGE (1 << 5)
-
/* SPI mode_rx flags */
#define SPI_RX_SLOW (1 << 0)
#define SPI_RX_FAST (1 << 1)
@@ -122,7 +114,14 @@ struct spi_slave {
unsigned int max_write_size;
void *memory_map;
u8 option;
+
u8 flags;
+#define SPI_XFER_BEGIN 0x01 /* Assert CS before transfer */
+#define SPI_XFER_END 0x02 /* Deassert CS after transfer */
+#define SPI_XFER_MMAP 0x08 /* Memory Mapped start */
+#define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */
+#define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END)
+#define SPI_XFER_U_PAGE (1 << 5)
};
/**
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
