Management Complex FW 9.0 puts a new requirement to provide Tx confirmation
and error queue configuration by calling dpni_set_tx_conf API.
Configure report of only error frames for a tx frame.
Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com>
---
drivers/net/ldpaa_eth/ldpaa_eth.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c
b/drivers/net/ldpaa_eth/ldpaa_eth.c
index 85eb2c4..a2e455f 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.c
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
@@ -783,6 +783,7 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv)
{
struct dpni_pools_cfg pools_params;
struct dpni_tx_flow_cfg dflt_tx_flow;
+ struct dpni_tx_conf_cfg tx_conf_cfg;
int err = 0;
pools_params.num_dpbp = 1;
@@ -807,6 +808,17 @@ static int ldpaa_dpni_bind(struct ldpaa_eth_priv *priv)
return err;
}
+ memset(&tx_conf_cfg, 0, sizeof(struct dpni_tx_conf_cfg));
+ tx_conf_cfg.errors_only = true;
+ /*Set tx-conf and error configuration*/
+ err = dpni_set_tx_conf(dflt_mc_io, MC_CMD_NO_FLAGS,
+ dflt_dpni->dpni_handle,
+ priv->tx_flow_id, &tx_conf_cfg);
+ if (err) {
+ printf("dpni_set_tx_conf() failed\n");
+ return err;
+ }
+
return 0;
}
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
