From: Sascha Hauer <s.ha...@pengutronix.de>

of_set_phy_supported allows overwiting hardware capabilities of
a phy with values from the devicetree. This does not work with
the genphy driver though because the genphys config_init function
will overwrite all values adjusted by of_set_phy_supported. Fix
this by initialising the genphy features in the phy_driver struct
and in config_init just limit the features to the ones the hardware
can actually support. The resulting features are a subset of the
devicetree specified features and the hardware features.

This is a copy of the patch from Linux kernel, see
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c242a47238fa2a6a54af8a16e62b54e6e031d4bc

Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
Cc: Joe Hershberger <joe.hershber...@ni.com>
---
 drivers/net/phy/phy.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 084276f..ec9be6b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -380,8 +380,6 @@ int genphy_config(struct phy_device *phydev)
        int val;
        u32 features;
 
-       /* For now, I'll claim that the generic driver supports
-        * all possible port types */
        features = (SUPPORTED_TP | SUPPORTED_MII
                        | SUPPORTED_AUI | SUPPORTED_FIBRE |
                        SUPPORTED_BNC);
@@ -420,8 +418,8 @@ int genphy_config(struct phy_device *phydev)
                        features |= SUPPORTED_1000baseX_Half;
        }
 
-       phydev->supported = features;
-       phydev->advertising = features;
+       phydev->supported &= features;
+       phydev->advertising &= features;
 
        genphy_config_aneg(phydev);
 
@@ -445,7 +443,9 @@ static struct phy_driver genphy_driver = {
        .uid            = 0xffffffff,
        .mask           = 0xffffffff,
        .name           = "Generic PHY",
-       .features       = 0,
+       .features       = PHY_GBIT_FEATURES | SUPPORTED_MII |
+                         SUPPORTED_AUI | SUPPORTED_FIBRE |
+                         SUPPORTED_BNC,
        .config         = genphy_config,
        .startup        = genphy_startup,
        .shutdown       = genphy_shutdown,
-- 
2.4.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to