Update the qspiboot console command to use UBIFS instead
of old jffs2 file system.
Signed-off-by: Chin Liang See <cl...@altera.com>
Cc: Dinh Nguyen <dingu...@opensource.altera.com>
Cc: Dinh Nguyen <dinh.li...@gmail.com>
Cc: Pavel Machek <pa...@denx.de>
Cc: Marek Vasut <ma...@denx.de>
Cc: Stefan Roese <s...@denx.de>
---
Changes for v2
- part of series
---
include/configs/socfpga_cyclone5_socdk.h | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/include/configs/socfpga_cyclone5_socdk.h
b/include/configs/socfpga_cyclone5_socdk.h
index 0ed7f42..c4c4ecb 100644
--- a/include/configs/socfpga_cyclone5_socdk.h
+++ b/include/configs/socfpga_cyclone5_socdk.h
@@ -71,11 +71,9 @@
"load mmc 0:1 ${loadaddr} ${bootimage};" \
"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
"qspiload=sf probe && mtdparts default && run ubiload\0" \
- "qspiroot=/dev/mtdblock0\0" \
- "qspirootfstype=jffs2\0" \
"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
- " root=${qspiroot} rw rootfstype=${qspirootfstype};"\
- "bootm ${loadaddr} - ${fdt_addr}\0" \
+ " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
+ "bootz ${loadaddr} - ${fdt_addr}\0" \
"ubiload=ubi part UBI && ubifsmount ubi0 && " \
"ubifsload ${loadaddr} /boot/${bootimage} && " \
"ubifsload ${fdt_addr} /boot/${fdtimage}\0"
--
1.9.2.468.g3f0c02a
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
