On Tue, 2015-12-22 at 00:14 +0100, Marek Vasut wrote:
> On Monday, December 21, 2015 at 05:08:17 PM, Chin Liang See wrote:
> > Update the qspiboot console command to use UBIFS instead
> > of old jffs2 file system.
> >
> > Signed-off-by: Chin Liang See <cl...@altera.com>
> > Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> > Cc: Dinh Nguyen <dinh.li...@gmail.com>
> > Cc: Pavel Machek <pa...@denx.de>
> > Cc: Marek Vasut <ma...@denx.de>
> > Cc: Stefan Roese <s...@denx.de>
> > ---
> > include/configs/socfpga_cyclone5_socdk.h | 6 ++----
> > 1 file changed, 2 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/configs/socfpga_cyclone5_socdk.h
> > b/include/configs/socfpga_cyclone5_socdk.h index 61450cb..a0f62ef
> > 100644
> > --- a/include/configs/socfpga_cyclone5_socdk.h
> > +++ b/include/configs/socfpga_cyclone5_socdk.h
> > @@ -71,11 +71,9 @@
> > "load mmc 0:1 ${loadaddr} ${bootimage};" \
> > "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
> > "qspiload=sf probe; mtdparts default;run ubiload\0" \
> > - "qspiroot=/dev/mtdblock0\0" \
> > - "qspirootfstype=jffs2\0" \
> > "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> > - " root=${qspiroot} rw
> > rootfstype=${qspirootfstype};"\
> > - "bootm ${loadaddr} - ${fdt_addr}\0" \
> > + " ubi.mtd=1,64 root=ubi0:rootfs rw
> > rootfstype=ubifs;"\
>
> Why do you use 1,64 ? Just use /dev/mtdN , no ?
I tried and Linux claim unknown block. Quick grep the Linux dts and
everyone is using similar way where 1 indicate mtd1 and 64 indicate
page size.
Thanks
Chin Liang
>
> > + "bootz ${loadaddr} - ${fdt_addr}\0" \
> > "ubiload=ubi part UBI; ubifsmount ubi0;" \
> > "ubifsload ${loadaddr} /boot/${bootimage};" \
> > "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
>
> Best regards,
> Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
