On Fri, 2015-12-18 at 08:50 +0000, 圣江 吴 wrote: > > > On Dec 18, 2015, at 12:46 AM, Chin Liang See <cl...@altera.com> > wrote: > > > Hi Shengjiang, > > > > On Fri, 2015-12-18 at 16:43 +0800, shengjiangwu wrote: > > > Updated pinmux group MIXED1IO[0-13] for RGMII1. > > > Updated EMAC1 clock. > > > Signed-off-by: shengjiangwu <shengjian...@icloud.com> > > > Cc: Chin Liang See <cl...@altera.com> > > > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > > > Cc: Dinh Nguyen <dinh.li...@gmail.com> > > > Cc: Pavel Machek <pa...@denx.de> > > > Cc: Marek Vasut <ma...@denx.de> > > > Cc: Stefan Roese <s...@denx.de> > > > --- > > > Changes for v2: > > > - fixed wrong perpll for emac1 > > > --- > > > board/altera/cyclone5-socdk/qts/pll_config.h | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > diff --git a/board/altera/cyclone5-socdk/qts/pll_config.h > > > b/board/altera/cyclone5-socdk/qts/pll_config.h > > > index eccc705..5b754ac 100644 > > > --- a/board/altera/cyclone5-socdk/qts/pll_config.h > > > +++ b/board/altera/cyclone5-socdk/qts/pll_config.h > > > @@ -65,7 +65,7 @@ > > > #define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 > > > #define CONFIG_HPS_CLK_SDRVCO_HZ 666666666 > > > #define CONFIG_HPS_CLK_EMAC0_HZ 250000000 > > > -#define CONFIG_HPS_CLK_EMAC1_HZ 50000000 > > > +#define CONFIG_HPS_CLK_EMAC1_HZ 250000000 > > > > This is good. But I believe you miss the pinmux change here. You > > just > > need to take the previous patch and made the change. > > > > Thanks > > Chin Liang > Sorry for not familiar with re-patch process.
No worries as you are almost there. Thanks Chin Liang > Best Regards > Shengjiangwu > > > > > > > #define CONFIG_HPS_CLK_USBCLK_HZ 200000000 > > > #define CONFIG_HPS_CLK_NAND_HZ 50000000 > > > #define CONFIG_HPS_CLK_SDMMC_HZ 200000000 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
