Hi Matwey On Sat, Dec 12, 2015 at 3:14 AM, Matwey V. Kornilov <matwey.korni...@gmail.com> wrote: > Hello, > > I am running 2016.01-rc on BBB (Embest replica) > > printenv shows the following: > > findfdt=if test $board_name = A335BONE; then setenv fdtfile > am335x-bone.dtb; fi; if test $board_name = A335BNLT; then if test > $board_rev = BBG1; then setenv fdtfile am335x-bonegreen.dtb; else setenv > fdtfile am335x-boneblack.dtb; fi; fi; if test $board_name = A33515BB; > then setenv fdtfile am335x-evm.dtb; fi; if test $board_name = A335X_SK; > then setenv fdtfile am335x-evmsk.dtb; fi; if test $fdtfile = undefined; > then echo WARNING: Could not determine device tree to use; fi; > > after findfdt has been run, > > fdtfile=am335x-bonegreen.dtb > > But it is not correct. My $board_rev is the following, I have no idea > why does it contain line break. > > board_name=A335BNLT > board_rev=t\
Yuck, another variation! Can you do me a favor and dump the eeprom: https://github.com/beagleboard/image-builder/blob/master/readme.md Download and run: wget https://raw.githubusercontent.com/RobertCNelson/boot-scripts/master/device/bone/tester/show-eeprom.sh sudo /bin/bash show-eeprom.sh It uses hexdump and compatible with bb.org' 3.8/4.1/etc.. The green should only trigger on: 0x1a 0x00 0x00 0x00 http://git.denx.de/?p=u-boot.git;a=blobdiff;f=board/ti/am335x/board.c;h=f56d17ec58e17a6532b5df649249b4038b475897;hp=f0cb1e204ad550622df7848a993f1eb2f173bc43;hb=dfd1bb4ec89e8b1e87f0605af2345ad6dcf777da;hpb=e4aa8edb6e5cae256a5c5a3c5cd30e05e8f5a2b4 Regards, -- Robert Nelson https://rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
