On Wednesday, December 16, 2015 at 05:05:15 PM, Alexey Brodkin wrote: > This commit adds support of USB 1.1 storage media on AXS103 board. > For some yet unknown reason USB 2.0 doesn't work on AXS103 board issuing > messages like this: > ------------------------>8------------------- > AXS# usb start > starting USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80 > unable to get device descriptor (error=-1) > 1 USB Device(s) found > ------------------------>8-------------------
Try defining CONFIG_EHCI_IS_TDI , that _might_ help. > As a work-around we're falling back to USB 1.1. > Indeed it is much slower but at least USB storage devices are usable on > AXS103. > > Signed-off-by: Alexey Brodkin <abrod...@synopsys.com> > Cc: Marek Vasut <ma...@denx.de> > Cc: Simon Glass <s...@chromium.org> > --- > arch/arc/dts/axs10x.dts | 6 ++++++ > configs/axs103_defconfig | 3 +-- > include/configs/axs101.h | 6 ++++++ > 3 files changed, 13 insertions(+), 2 deletions(-) > > diff --git a/arch/arc/dts/axs10x.dts b/arch/arc/dts/axs10x.dts > index 80e6d6b..391d067 100644 > --- a/arch/arc/dts/axs10x.dts > +++ b/arch/arc/dts/axs10x.dts > @@ -48,4 +48,10 @@ > reg = < 0xe0040000 0x100 >; > interrupts = < 8 >; > }; > + > + ohci@0xe0060000 { > + compatible = "generic-ohci"; > + reg = < 0xe0060000 0x100 >; > + interrupts = < 8 >; > + }; > }; > diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig > index 3c65c83..a208a27 100644 > --- a/configs/axs103_defconfig > +++ b/configs/axs103_defconfig > @@ -21,7 +21,6 @@ CONFIG_ETH_DESIGNWARE=y > CONFIG_SYS_NS16550=y > CONFIG_USB=y > CONFIG_DM_USB=y > -CONFIG_USB_EHCI_HCD=y > -CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_OHCI_GENERIC=y > CONFIG_USB_STORAGE=y > CONFIG_USE_PRIVATE_LIBGCC=y > diff --git a/include/configs/axs101.h b/include/configs/axs101.h > index 650d97d..c92cca2 100644 > --- a/include/configs/axs101.h > +++ b/include/configs/axs101.h > @@ -105,6 +105,12 @@ > #define CONFIG_DW_AUTONEG > > /* > + * USB 1.1 configuration > + */ > +#define CONFIG_USB_OHCI_NEW > +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 > + > +/* > * Commands still not supported in Kconfig > */ > #define CONFIG_CMD_FAT _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot