Now that the DWC2 driver supports split transactions, we can reasonably enable support for USB keyboards. This wasn't terribly useful before since keyboards are usually LS/FS devices, and thus require split transaction support when attached to a USB hub such as the hub built into the RPi model Bs.
Cc: Stefan Brüns <[email protected]> Signed-off-by: Stephen Warren <[email protected]> --- This depends on Stefan Brüns' series "usb: dwc2: add SPLIT transaction support". --- include/configs/rpi-common.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h index 1b83eb36a728..927bae78eb5a 100644 --- a/include/configs/rpi-common.h +++ b/include/configs/rpi-common.h @@ -88,6 +88,9 @@ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MISC_INIT_R +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_SYS_STDIO_DEREGISTER #endif /* Console UART */ @@ -111,6 +114,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_PREBOOT "usb start" /* Shell */ #define CONFIG_SYS_MAXARGS 8 @@ -133,7 +137,7 @@ /* Environment */ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ + "stdin=serial,usbkbd\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
