> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Mateusz > Kulikowski > Sent: 14-Dec-15 7:09 PM > To: u-boot@lists.denx.de; Marek Vasut; Joe Hershberger > Subject: [U-Boot] [PATCH 0/5] Add wait_for_bit() > > > This series add generic function to poll register waiting for > one or more bits to change. > > Very similar function was used in several drivers: > - dwc2 > - ohci-lp32xx > - ehci-mx6 > - zynq_gem > > First patch adds function, following patches update drivers and > board config files / defconfigs. > > This series was compile-tested with buildman for ~50 boards > (most or even all boards affected by change) > > Code was also run-tested on ehci-msm driver (not yet in mainline) > > There is single difference in behavior: ohci-lp32xx driver will > not print "Timeout..." message with debug disabled. > I think it's not a big issue as this driver seems unused, but > if it's an issue - please drop that patch.
This is not an issue; the lpc32xx driver is used in our custom board based on u-boot 2015.10. > > ... > > -- > 2.5.0 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de ________________________________ This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
