Hi Marek,
> On Thursday, December 10, 2015 at 05:51:12 PM, Marek Vasut wrote:
> > On Thursday, December 10, 2015 at 05:07:53 PM, Lukasz Majewski
> > wrote:
> > > Hi Marek,
> > >
> > > > On Wednesday, December 09, 2015 at 05:06:52 PM, Lukasz Majewski
> > > > wrote:
> > > > > Hi Marek,
> > > > >
> > > > > > On Wednesday, December 09, 2015 at 04:02:58 PM, Lukasz
> > > > > > Majewski
> > > > > >
> > > > > > wrote:
> > > > > > > Hi Marek,
> > > > > > >
> > > > > > > > On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz
> > > > > > > > Majewski
> > > > > > > >
> > > > > > > > wrote:
> > > > > > > > > Hi Marek,
> > > > > > > > >
> > > > > > > > > > The driver is for the dwc2 otg block , so rename it
> > > > > > > > > > accordingly finally.
> > > > > > > > > >
> > > > > > > > > > Marek Vasut (24):
> > > > > > > > > > usb: s3c-otg: Rename regs-otg.h to
> > > > > > > > > > s3c_udc_otg_regs.h usb: s3c-otg: Rename struct
> > > > > > > > > > s3c_udc to dwc2_udc usb: s3c-otg: Rename struct
> > > > > > > > > > s3c_usbotg_reg to
> > > > > > > > > >
> > > > > > > > > > dwc2_usbotg_reg usb: s3c-otg: Split private bits
> > > > > > > > > > from s3c_udc.h usb: s3c-otg: Rename struct
> > > > > > > > > > s3c_usbotg_phy to dwc2_usbotg_phy usb: s3c-otg:
> > > > > > > > > > Rename struct s3c_dev_*_ep
> > > > > > > > > >
> > > > > > > > > > usb: s3c-otg: Rename struct s3c_ep
> > > > > > > > > > usb: s3c-otg: Rename struct s3c_request
> > > > > > > > > > usb: s3c-otg: Staticize s3c_udc_ep_set_stall
> > > > > > > > > > usb: s3c-otg: Staticize functions in
> > > > > > > > > >
> > > > > > > > > > s3c_udc_otg_xfer_dma.c usb: s3c-otg: Rename
> > > > > > > > > > s3c_ep0_*() functions usb: s3c-otg: Rename
> > > > > > > > > > s3c_ep_*() functions
> > > > > > > > > >
> > > > > > > > > > usb: s3c-otg: Rename s3c_udc_*() functions
> > > > > > > > > > usb: s3c-otg: Rename remaining local s3c_*()
> > > > > > > > > > functions usb: s3c-otg: Zap useless externs
> > > > > > > > > > usb: s3c-otg: Change the driver name to dwc2-udc
> > > > > > > > > > usb: s3c-otg: Rename local headers to dwc2_*h
> > > > > > > > > > usb: s3c-otg: Rename sources to dwc2_*c
> > > > > > > > > > usb: s3c-otg: Rename remaining macros
> > > > > > > > > > usb: s3c-otg: Tweak the comments
> > > > > > > > > > usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to
> > > > > > > > > >
> > > > > > > > > > USB_GADGET_DWC2_OTG* usb: s3c-otg: Rename struct
> > > > > > > > > > s3c_plat_otg_data
> > > > > > > > > >
> > > > > > > > > > usb: s3c-otg: Rename s3c_udc_probe() function
> > > > > > > > > > usb: s3c-otg: Rename usb/s3c_udc.h to
> > > > > > > > > > usb/dwc2_udc.h
> > > > > > > > > > board/altera/arria5-socdk/socfpga.c
> > > > > > > > > > | 6
> > > > > > > > > >
> > > > > > > > > > +-
> > > > > > > > > > board/altera/cyclone5-socdk/socfpga.c
> > > > > > > > > > | 6 +- board/broadcom/bcm28155_ap/bcm28155_ap.c
> > > > > > > > > >
> > > > > > > > > > | 8 +-
> > > > > > > > > >
> > > > > > > > > > board/denx/mcvevk/socfpga.c
> > > > > > > > > > | 6 +-
> > > > > > > > > > board/ebv/socrates/socfpga.c
> > > > > > > > > > | 6 +- board/samsung/goni/goni.c
> > > > > > > > > >
> > > > > > > > > > | 6 +-
> > > > > > > > > >
> > > > > > > > > > board/samsung/odroid/odroid.c
> > > > > > > > > > | 6 +-
> > > > > > > > > > board/samsung/trats/trats.c
> > > > > > > > > > | 8 +- board/samsung/trats2/trats2.c
> > > > > > > > > >
> > > > > > > > > > | 6 +-
> > > > > > > > > >
> > > > > > > > > > board/samsung/universal_c210/universal.c
> > > > > > > > > > | 6 +-
> > > > > > > > > > board/terasic/sockit/socfpga.c
> > > > > > > > > > | 6 +- drivers/usb/gadget/Makefile
> > > > > > > > > >
> > > > > > > > > > | 4 +-
> > > > > > > > > >
> > > > > > > > > > drivers/usb/gadget/bcm_udc_otg_phy.c
> > > > > > > > > > | 6 +- .../usb/gadget/{s3c_udc_otg.c =>
> > > > > > > > > > dwc2_udc_otg.c} | 205
> > > > > > > > > >
> > > > > > > > > > +++++++++++---------- .../{s3c_udc_otg_phy.c =>
> > > > > > > > > > dwc2_udc_otg_phy.c} | 21
> > > > > > > > > > ++- .../usb/gadget/dwc2_udc_otg_priv.h
> > > > > > > > > > | 43 ++--- .../usb/gadget/{regs-otg.h =>
> > > > > > > > > > dwc2_udc_otg_regs.h} | 32
> > > > > > > > > > ++-- ..._udc_otg_xfer_dma.c =>
> > > > > > > > > > dwc2_udc_otg_xfer_dma.c} | 202 ++++++++++----------
> > > > > > > > > > include/configs/bcm28155_ap.h
> > > > > > > > > > | 2 +-
> > > > > > > > > > include/configs/exynos4-common.h
> > > > > > > > > > | 4 +- include/configs/s5p_goni.h
> > > > > > > > > >
> > > > > > > > > > | 4 +-
> > > > > > > > > >
> > > > > > > > > > include/configs/s5pc210_universal.h
> > > > > > > > > > | 4 +-
> > > > > > > > > > include/configs/smdkv310.h
> > > > > > > > > > | 4 +- include/configs/socfpga_common.h
> > > > > > > > > >
> > > > > > > > > > | 2 +-
> > > > > > > > > >
> > > > > > > > > > include/usb/dwc2_udc.h
> > > > > > > > > > | 23 +++ 25 files changed, 319 insertions(+), 307
> > > > > > > > > > deletions(-) rename
> > > > > > > > > > drivers/usb/gadget/{s3c_udc_otg.c =>
> > > > > > > > > > dwc2_udc_otg.c} (77%) rename
> > > > > > > > > > drivers/usb/gadget/{s3c_udc_otg_phy.c =>
> > > > > > > > > > dwc2_udc_otg_phy.c} (83%) rename
> > > > > > > > > > include/usb/s3c_udc.h =>
> > > > > > > > > > drivers/usb/gadget/dwc2_udc_otg_priv.h (69%) rename
> > > > > > > > > > drivers/usb/gadget/{regs-otg.h =>
> > > > > > > > > > dwc2_udc_otg_regs.h} (92%) rename
> > > > > > > > > > drivers/usb/gadget/{s3c_udc_otg_xfer_dma.c =>
> > > > > > > > > > dwc2_udc_otg_xfer_dma.c} (88%) create mode 100644
> > > > > > > > > > include/usb/dwc2_udc.h
> > > > > > > > >
> > > > > > > > > What is the base sha1 and branch for those patches?
> > > > > > > > >
> > > > > > > > > I cannot apply them on u-boot-usb/master (SHA1:
> > > > > > > > > 59a38d86de2439c72d72be54958a04bb1b778410)
> > > > > > > >
> > > > > > > > I should've updated u-boot-usb, sorry about that. I can
> > > > > > > > pick them through u-boot-usb/master if you don't mind
> > > > > > > > to make things easier for you. I put the patches into
> > > > > > > > u-boot-usb/s3c-udc for now.
> > > > > > >
> > > > > > > Ok, thanks.
> > > > > > >
> > > > > > > I will examine that.
> > > > > >
> > > > > > OK, shall I wait with application then ?
> > > > >
> > > > > Please prepare u-boot-usb/s3c-udc branch.
> > >
> > > I've run this patch series through buildman (before running
> > > tests):
> > >
> > > ./tools/buildman/buildman.py --branch=HEAD samsung --detail
> > > --verbose --show_errors --force-build --count=24
> > > --output-dir=./BUILD/
> > >
> > > And I've received several errors:
> > > arm: + odroid
> > >
> > > +../board/samsung/odroid/odroid.c:460:15: error: 'PHY0_SLEEP'
> > >
> > > undeclared here (not in a function)
> > >
> > > + .usb_flags = PHY0_SLEEP,
> > > + ^
> > > +make[2]: *** [board/samsung/odroid/odroid.o] Error 1
> > > +make[1]: *** [board/samsung/odroid] Error 2
> > > +make: *** [sub-make] Error 2
> > >
> > > Please fix :-)
> >
> > Try the attached fix, if it's OK with you I will wrap it into
> > 04/24 .
>
> I pushed the updated branch to u-boot-usb/s3c-udc , so give it a spin.
>
Reviewed-by: Lukasz Majewski <l.majew...@samsung.com>
Tested-by: Lukasz Majewski <l.majew...@samsung.com>
Test HW: Trats (Exynos4210) and Odroid XU3 (Exynos5800)
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
