On Fri 2015-12-11 17:15:50, Chin Liang See wrote:
> Enabling mtd partitioning layout which indicate partition
> for various boot partition
> 
> Signed-off-by: Chin Liang See <cl...@altera.com>
> Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.li...@gmail.com>
> Cc: Pavel Machek <pa...@denx.de>
> Cc: Marek Vasut <ma...@denx.de>
> Cc: Stefan Roese <s...@denx.de>
> ---
>  include/configs/socfpga_de0_nano_soc.h | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/include/configs/socfpga_de0_nano_soc.h 
> b/include/configs/socfpga_de0_nano_soc.h
> index 16e146c..c42175d 100644
> --- a/include/configs/socfpga_de0_nano_soc.h
> +++ b/include/configs/socfpga_de0_nano_soc.h
> @@ -86,4 +86,16 @@
>  /* The rest of the configuration is shared */
>  #include <configs/socfpga_common.h>
> 
> +/* mtd partitioning for serial NOR flash */
> +#if defined(CONFIG_CMD_UBI) || defined(CONFIG_CMD_SF)
> +#define MTDPARTS_DEFAULT     "mtdparts=ff705000.spi:"\
> +                             "256k(spl),"            \
> +                             "64k(env),"             \
> +                             "64k(dtb),"             \
> +                             "256k(boot),"           \
> +                             "16m(kernel),"          \
> +                             "16m(rootfs),"          \
> +                             "-(UBI)\0"
> +#endif
> +
>  #endif       /* __CONFIG_TERASIC_DE0_H__ */

Ok, three copies of the same table. Should it go to socfpga common?
You could at least do

MTDPARTS_DEFAULT_SOCDK

and then use

#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_SOCDK

in the socfpga_de0_nano_soc.h, so we don't have 3 copies of the same
table.
                                                                        Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) 
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to