Hi Przemyslaw, On 11 December 2015 at 18:29, Przemyslaw Marczak <p.marc...@samsung.com> wrote: > Hello Anand, > > On 12/11/2015 01:48 PM, Anand Moon wrote: >> >> Hi Przemyslaw, >> >> I have give it a try to put latest u-boot on my microsdcard >> u-boot and it failed to boot. Could you help me out on this. >> >> U-Boot 2016.01-rc2-25762-g00502fe (Dec 11 2015 - 17:49:34 +0530) >> >> CPU: Exynos4412 @ 1 GHz >> Model: Odroid based on Exynos4412 >> Board: Odroid based on Exynos4412 >> Type: u3 >> DRAM: 2 GiB >> __of_translate_address: Bad cell count for gpf0 >> __of_translate_address: Bad cell count for gpj0 >> __of_translate_address: Bad cell count for gpk0 >> __of_translate_address: Bad cell count for gpm0 >> __of_translate_address: Bad cell count for gpx0 >> LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling >> LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling >> LDO21@TFLASH_2.8V: set 2800000 uV; enabling >> MMC: EXYNOS DWMMC: 0 >> Card did not respond to voltage select! >> *** Warning - MMC init failed, using default environment >> >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> ** Bad device mmc 0 ** >> ** Bad device mmc 0 ** >> ** Bad device mmc 0 ** >> ** Bad device mmc 0 ** >> Odroid # >> Odroid # >> Odroid # >> Odroid # >> >> -Anand Moon >> >> > > Yes, I know about this issue. There is a patch which fixes this: > > https://patchwork.ozlabs.org/patch/537372/ > > Please apply this patch locally, I will send another solution for this > issue, since at present it may be unsafe for some cases on other platforms. > > Best regards, > -- > Przemyslaw Marczak > Samsung R&D Institute Poland > Samsung Electronics > p.marc...@samsung.com
Thanks for this quick response, It worked for me. :) I am able to boot my u3 boards. -Anand Moon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
