Hi, The first part of this series is about adding MDIO support to driver which was out of mainline and it was much easier to merge it before move to DM. Then driver didn't use indirect register access. In the middle of moving this driver I have fixed logic in some functions which doesn't affect performance of this driver. All these changes were tested on HW design with emaclite with and without pong buffers.
This patch series depends on microblaze cleanup series. All these patches will be available in git://git.denx.de/u-boot-microblaze.git also with patches which I am going to send now. Thanks, Michal Michal Simek (12): net: emaclite: Remove ancient OF probe function net: emaclite: Add MDIO support to driver net: emaclite: Convert MDIO to use register offset net: emaclite: Use indirect register access for tx_ping/pong net: emaclite: Use indirect register access for tx_ping/pong net: emaclite: Use indirect register access for TX reset net: emaclite: Fix logic around available TX buffers net: emaclite: Remove XEL_TSR_XMIT_ACTIVE_MASK flag net: emaclite: Use indirect reg access in send net: emaclite: Use indirect access in emaclite_recv net: emaclite: Move driver to DM net: emaclite: Move emaclite to Kconfig .../xilinx/microblaze-generic/microblaze-generic.c | 21 - board/xilinx/microblaze-generic/xparameters.h | 3 - board/xilinx/zynq/board.c | 20 - configs/microblaze-generic_defconfig | 3 +- drivers/net/Kconfig | 8 + drivers/net/xilinx_emaclite.c | 570 +++++++++++++++------ include/configs/microblaze-generic.h | 3 +- include/netdev.h | 3 - 8 files changed, 412 insertions(+), 219 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
