Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable code.
Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> --- board/siemens/smartweb/smartweb.c | 6 +----- board/siemens/taurus/taurus.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index e7ee65c..47a60a7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -115,12 +115,8 @@ static void smartweb_macb_hw_init(void) void at91_udp_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init()); /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 9374064..b0385d8 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -289,12 +289,8 @@ void spi_cs_deactivate(struct spi_slave *slave) void at91_udp_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init()); /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot