[U-Boot] [PATCH 28/57] x86: ivybridge: Use driver model PCI API in bd82x6x_pci_init()

[Simon Glass]

Adjust bd82x6x_pci_init() to use the driver model PCI API.

Signed-off-by: Simon Glass <s...@chromium.org>
---
 arch/x86/cpu/ivybridge/northbridge.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/x86/cpu/ivybridge/northbridge.c 
b/arch/x86/cpu/ivybridge/northbridge.c
index 2e63552..f6ecba4 100644
--- a/arch/x86/cpu/ivybridge/northbridge.c
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -21,43 +21,43 @@
 
 static int bridge_revision_id = -1;
 
-static void bd82x6x_pci_init(pci_dev_t dev)
+static void bd82x6x_pci_init(struct udevice *dev)
 {
        u16 reg16;
        u8 reg8;
 
        debug("bd82x6x PCI init.\n");
        /* Enable Bus Master */
-       reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
+       dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
        reg16 |= PCI_COMMAND_MASTER;
-       x86_pci_write_config16(dev, PCI_COMMAND, reg16);
+       dm_pci_write_config16(dev, PCI_COMMAND, reg16);
 
        /* This device has no interrupt */
-       x86_pci_write_config8(dev, INTR, 0xff);
+       dm_pci_write_config8(dev, INTR, 0xff);
 
        /* disable parity error response and SERR */
-       reg16 = x86_pci_read_config16(dev, BCTRL);
+       dm_pci_read_config16(dev, BCTRL, &reg16);
        reg16 &= ~(1 << 0);
        reg16 &= ~(1 << 1);
-       x86_pci_write_config16(dev, BCTRL, reg16);
+       dm_pci_write_config16(dev, BCTRL, reg16);
 
        /* Master Latency Count must be set to 0x04! */
-       reg8 = x86_pci_read_config8(dev, SMLT);
+       dm_pci_read_config8(dev, SMLT, &reg8);
        reg8 &= 0x07;
        reg8 |= (0x04 << 3);
-       x86_pci_write_config8(dev, SMLT, reg8);
+       dm_pci_write_config8(dev, SMLT, reg8);
 
        /* Will this improve throughput of bus masters? */
-       x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+       dm_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
 
        /* Clear errors in status registers */
-       reg16 = x86_pci_read_config16(dev, PSTS);
+       dm_pci_read_config16(dev, PSTS, &reg16);
        /* reg16 |= 0xf900; */
-       x86_pci_write_config16(dev, PSTS, reg16);
+       dm_pci_write_config16(dev, PSTS, reg16);
 
-       reg16 = x86_pci_read_config16(dev, SECSTS);
+       dm_pci_read_config16(dev, SECSTS, &reg16);
        /* reg16 |= 0xf900; */
-       x86_pci_write_config16(dev, SECSTS, reg16);
+       dm_pci_write_config16(dev, SECSTS, reg16);
 }
 
 int bridge_silicon_revision(void)
@@ -284,7 +284,7 @@ static int bd82x6x_northbridge_probe(struct udevice *dev)
        if (!(gd->flags & GD_FLG_RELOC))
                return bd82x6x_northbridge_early_init(dev);
 
-       bd82x6x_pci_init(PCH_DEV);
+       bd82x6x_pci_init(dev);
        northbridge_enable(PCH_DEV);
        northbridge_init(PCH_DEV);
 
-- 
2.6.0.rc2.230.g3dd15c0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot