On Mon, 2015-12-07 at 14:18 +0100, Marek Vasut wrote: > Add code to process the KSZ9021/KSZ9031 OF props if they are present > and configure skew registers based on the information from the OF. > This code is only enabled if the DM support for ethernet is also > enabled. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Joe Hershberger <joe.hershber...@ni.com> > Cc: Chin Liang See <cl...@altera.com> > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > --- > drivers/net/phy/micrel.c | 146 > ++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 145 insertions(+), 1 deletion(-) > > V2: - Implement struct ksz90x1_reg_field to describe the skew > register > fields more accurately. > - Fix RXDV/TXEN skew register default value and offset. > >
Acked-by: Chin Liang See <cl...@altera.com> Thanks Chin Liang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot