Hi Fabio,
On Friday 04 December 2015 18:54:15, Fabio Estevam wrote:
> On Wed, Nov 4, 2015 at 6:19 AM, Alexander Stein
> <alexander.st...@systec-electronic.com> wrote:
> > When reading a large blob. e.g. a linux kernel (several MiBs) a watchdog
> > timeout might occur meanwhile. So pet the watchdog while operating on
> > the flash.
>
> I guess the same problem would occur when you do long file transfers
> via TFTP, via USB, via eMMC, right?
I didn't notice this problem with TFTP which takes ~3s. I don't have the
opportunity to use USB oder eMMC on this hardware.
> Shouldn't you fix the watchdog timeout value instead? If I read this
> thread correctly you set the watchdog timeout to be 1.5 s, which seems
> to be too low.
You might be right, but there absolutely no way to change that timeout. It's
_fixed_ in hardware. If you can't serve it, you got reset. It's that simple, no
matter what.
Best regards,
Alexander
--
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.st...@systec-electronic.com
Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany
Office: +49 (0) 3765 38600-0
Fax: +49 (0) 3765 38600-4100
Managing Directors:
Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
