Dear Alfred, In message <[email protected]> you wrote: > > >> Either U-Boot does not perform a real processor reset on your > > platform, and/or your system does not really reset all peripherals. > THe issue of a reboot command sure is just a processor reset , it does > not reset the peripherals including the NAND i guess.
That is by far not so sure. A reasonable hardware design will make sure that a CPU reset will also caus eall peripherals, and of course especially the boot device, to be reset, too. > Could it be a problem with the NAND boot code. Or would it be in > lowLevelINit. S for our platform. But if that would have been the > case, it should not have gone till the point it starts uncompressing > the kernel. as you see in my earlier email. What can we say? We don't know anything about your platform... Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Die meisten Menschen pflegen im Kindesalter vom Zeigen auf Gegenstän- de (Mausbewegung) und "ga" sagen (Mausklick) abzukommen, zugunsten eines mächtigeren und langwierig zu erlernenden Tools (Sprache). -- Achim Linder in de.comp.os.linux.misc _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
