Remove this c&p error from s5p driver.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
---
Changes in v2:
- fix typo in subject: referce -> reference
drivers/serial/Kconfig | 2 +-
drivers/serial/serial_zynq.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 82ad90d9e893..1fc287ee98ec 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -95,7 +95,7 @@ config DEBUG_UART_S5P
config DEBUG_UART_ZYNQ
bool "Xilinx Zynq"
help
- Select this to enable a debug UART using the serial_s5p driver. You
+ Select this to enable a debug UART using the serial_zynq driver. You
will need to provide parameters to make this work. The driver will
be available until the real driver-model serial is running.
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 88bebed23638..6807f0f812f5 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -180,7 +180,7 @@ static const struct udevice_id zynq_serial_ids[] = {
{ }
};
-U_BOOT_DRIVER(serial_s5p) = {
+U_BOOT_DRIVER(serial_zynq) = {
.name = "serial_zynq",
.id = UCLASS_SERIAL,
.of_match = zynq_serial_ids,
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
