On Wed, Dec 2, 2015 at 7:52 PM, Michal Simek <michal.si...@xilinx.com> wrote:
> Remove this c&p error from s5p driver.
>
> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
> ---
>
> drivers/serial/Kconfig | 2 +-
> drivers/serial/serial_zynq.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index e57c9ceb18ec..353fd2d25063 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -102,7 +102,7 @@ config DEBUG_UART_UARTLITE
> config DEBUG_UART_ZYNQ
> bool "Xilinx Zynq"
> help
> - Select this to enable a debug UART using the serial_s5p driver. You
> + Select this to enable a debug UART using the serial_zynq driver. You
> will need to provide parameters to make this work. The driver will
> be available until the real driver-model serial is running.
>
> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
> index 88bebed23638..6807f0f812f5 100644
> --- a/drivers/serial/serial_zynq.c
> +++ b/drivers/serial/serial_zynq.c
> @@ -180,7 +180,7 @@ static const struct udevice_id zynq_serial_ids[] = {
> { }
> };
>
> -U_BOOT_DRIVER(serial_s5p) = {
> +U_BOOT_DRIVER(serial_zynq) = {
> .name = "serial_zynq",
> .id = UCLASS_SERIAL,
> .of_match = zynq_serial_ids,
> --
Reviewed-by: Bin Meng <bmeng...@gmail.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
